recoil buffer is a factory-installed or aftermarket component of firearms which serves to reduce the velocity and/or cushion the impact of recoiling parts...

the barrel. To mitigate these large recoil forces, recoil buffering mechanisms spread out the counter-recoiling force over a longer time, typically ten...

output Floor buffer, an appliance used to polish hard floors Optical buffer, a device that stores optically transmitted data Recoil buffer, a firearm component...

ordnance personnel began to receive BARs with inoperable or malfunctioning recoil buffer mechanisms. This was eventually traced to the soldier's common practice...

groove on the bolt carrier to aid in silent bolt closure, a heavier recoil buffer for increased reliability and a rotary diopter rear sight with four...

if the full power of the gas system is employed without some sort of recoil buffer. The problem is that making the gun durable with such high power loads...

recoil buffer tube extended from the back of the receiver to make the cycle of the bolt smoother than previous designs, to absorb some of the recoil of...

spring and recoil buffer. The stock being in line with the bore also reduces muzzle rise, especially during automatic fire. Because recoil does not significantly...

clip-off mechanism allows the UBGL to be fitted, with an additional recoil buffer, to any weapon fitted with a Picatinny rail. The UBGL is fitted with...

operation. This version has a removable barrel and uses a sealed hydraulic recoil buffer in place of a gas cylinder. After swapping out the barrel and magazine...

reduce the amount of felt recoil of the firearm, and to prevent slippage on the shooter's clothing while aiming. Recoil buffer "Recoil Pad". AmmoWisdom.com...

40 S&W pressures. Other features added include a captive recoil spring, internal recoil buffer, user changeable monogrips and 17-round magazines. The 92A1...

the M249, which contains a hydraulic buffer that contributes to stabilizing the rate of fire and reducing recoil forces. The weapon is fed from the left-hand...

behind the action, and serves the dual function of operating spring and recoil buffer. In 1955, Stoner completed initial design work on the revolutionary...

spring and recoil buffer. The stock being in line with the bore also reduces muzzle rise, especially during automatic fire. Because recoil does not significantly...

previous Chinese designs. Thanks to the low recoil impulse of the small caliber ammunition and a recoil buffer system, the rifle is claimed to be more controllable...

Cartridge extractor U.S. patent 829,215 Forearm tip U.S. patent 834,578 Recoil buffer U.S. patent 963,444 Buttstock bolt The government initially ordered...

recoil, a spring-loaded cradle replaced the backplate with a heavily spring-loaded buffer that acted as an extension of the standard Browning recoil buffer...

features a telescoping return spring guide which serves as a pneumatic recoil buffer. The cocking handle was permanently attached to the bolt on early MP...

necessary to fire the more powerful .50 BMG, including a hydraulic recoil buffer in the buttstock and an innovative muzzle attachment. This muzzle device...

pounder early World War I field gun (the BL 15-pounder gun adapted with a recoil buffer and recuperator similar to the 13-pounder) Ordnance QF 17 pounder World...

spring and recoil buffer. The stock being in line with the bore also reduces muzzle rise, especially during automatic fire. Because recoil does not significantly...

charging handle system (charging handle post, charging handle, and recoil buffer), a press-fit gas block, and barrel gas port inside bevel. In August...

skeletal stock. Most AR-15 rifle variants have a thick, cylindrical recoil buffer tube, more properly called the receiver extension, that protrudes approximately...

machine gun to .50 cal Browning had to introduce a proper hydraulic recoil buffer instead of a cheaper stack of fiber disks on .30-cal M1917 and M1919...

role configuration with L4A1 Tripod Mounting, buttstock replaced by a recoil buffer, and C2A2 Support Weapons Sight fitted to the left side of the receiver...

barrel could be quickly removed from the recoil cradle without having to unscrew and remove the recoil buffer and springs. On difficult terrain that may...

corresponding springs are attached to the spring holder base plate. A recoil buffer sits on the base plate to prevent damage to the bolt when cycling. The...

intended as a rival to the M1918 BAR. It had an extended receiver with a recoil buffer and was fed from 20-round magazines. .30 Carbine Variant. The Model...

(sometimes referred to as the RPDM) includes an extended gas cylinder and a recoil buffer mechanism in the stock. Late production RPD variants also had the fixed...