In materials science, shear modulus or modulus of rigidity, denoted by G, or sometimes S or μ, is a measure of the elastic shear stiffness of a material...

An elastic modulus (also known as modulus of elasticity (MOE)) is a quantity that describes an object's or substance's resistance to being deformed elastically...

additional elastic modulus, for example the shear modulus, is needed to determine wave speeds. It is possible to measure the bulk modulus using powder diffraction...

Young's modulus (or the Young modulus) is a mechanical property of solid materials that measures the tensile or compressive stiffness when the force is...

medium's compressibility, shear modulus, and density. The speed of shear waves is determined only by the solid material's shear modulus and density. In fluid...

properties can be well-characterized by the Young's modulus, Poisson's ratio, Bulk modulus, and Shear modulus or they may be described by the Lamé parameters...

others will compute the stiffness (specifically the Young's modulus or similar shear modulus) and display that instead. Some techniques present results...

measures the resonant frequencies in order to calculate the Young's modulus, shear modulus, Poisson's ratio and internal friction of predefined shapes like...

the high-frequency shear modulus times a characteristic shoving volume. Upon specifying the temperature dependence of the shear modulus via thermal expansion...

of a material is quantified by the elastic modulus such as the Young's modulus, bulk modulus or shear modulus which measure the amount of stress needed...

resistance to change in shape. A superhard material has high shear modulus, high bulk modulus, and does not deform plastically. Ideally superhard materials...

are the Lamé parameters ( μ {\displaystyle \mu } being the material's shear modulus). It follows that τ i j = λ δ i j ∑ k ∂ k u k + μ ( ∂ i u j + ∂ j u...

−1.0 and +0.5 because of the requirement for Young's modulus, the shear modulus and bulk modulus to have positive values. Most materials have Poisson's...

strength include ISO 3597, 12579, and 14130. Shear modulus Shear stress Shear strain Shear strength (soil) Shear strength (Discontinuity) Strength of materials...

Pure shear stress is related to pure shear strain, denoted γ, by the equation τ = γ G , {\displaystyle \tau =\gamma G,} where G is the shear modulus of...

two independent components, which can be chosen to be the bulk modulus and shear modulus. The most general linear relation between two second-rank tensors...

To get shear stress, then the energy strain function is differentiated with respect to shear strain to get the shear modulus, G, times the shear strain:...

Dynamic modulus (sometimes complex modulus) is the ratio of stress to strain under vibratory conditions (calculated from data obtained from either free...

g/cm³). For isotropic materials, the relationship between the shear modulus and Young's modulus can also be expressed as E = 2 G ( 1 + ν ) {\displaystyle...

order of the crystal is destroyed. Simultaneously, the shear modulus and the Young's modulus disappear, which implies that the crystal is molten to a...

applied. φ (phi) is the angle of twist in radians. G is the shear modulus, also called the modulus of rigidity, and is usually given in gigapascals (GPa),...

Bulk modulus, a measure of compression resistance Elastic modulus, a measure of stiffness Shear modulus, a measure of elastic stiffness Young's modulus, a...

an applied shear stress, or external force. They have zero shear modulus, or, in simpler terms, are substances which cannot resist any shear force applied...

therefore a stronger interaction with dislocations. Modulus hardening results from the different shear modulus of the precipitate and the matrix, which leads...

shape in question. There are two types of section modulus, elastic and plastic: The elastic section modulus is used to calculate a cross-section's resistance...

describe a material's response to stress, along with the shear modulus and Young's modulus. buoyancy Contents:  Top 0–9 A B C D E F G H I J K L M N O...

fractional extension or strain ε by the modulus of elasticity E: σ = E ε . {\displaystyle \sigma =E\varepsilon .} The modulus of elasticity may often be considered...

the shear modulus describes the response to shear, and Young's modulus describes the response to linear stress. For a fluid, only the bulk modulus is meaningful...

called the shear modulus,: p.333  and is sometimes denoted by G instead of μ. Typically the notation G is seen paired with the use of Young's modulus E, and...

distance between opposing shear forces decreases. Rotary inertia effect was introduced by Bresse and Rayleigh. If the shear modulus of the beam material approaches...