A stuffing box or gland package is an assembly which is used to house a gland seal. It is used to prevent leakage of fluid, such as water or steam, between...

elections by first-past-the-post.[citation needed] Ballot stuffing, or "ballot-box stuffing", is the illegal practice of one person submitting multiple...

Stove Top is a stuffing that was introduced by General Foods in 1972. It is a quick cooking ("instant") stuffing that is available in supermarkets. Unlike...

steam engine introduced an enclosed upper cylinder. This now required a stuffing box to seal around the piston rod, and for the piston rod to be machined...

bilge. This water may be from rough seas, rain, leaks in the hull or stuffing box, or other interior spillage. The collected water must be pumped out to...

via a stuffing box. The saildrive has several advantages over the traditional sailboat transmission: smaller horizontal size, no stuffing box to maintain...

times, preventing bearing movement above the stuffing box. A combination of the polished rod and stuffing box is employed to maintain an effective liquid...

the horse head to the polished rod, a piston that passes through the stuffing box. The cranks themselves also produce counterbalance due to their weight...

seal Face seal Plug Radial shaft seal Trap (plumbing) (siphon trap) Stuffing box (mechanical packing) Wiper seal Dry gas seal Leakage (chemistry) Wikimedia...

while the bearings are outside the sump. This style of pump uses no stuffing box to seal the shaft but instead utilizes a "throttle bushing". A common...

pumping too fast leads to the pump rods buckling, making the seal of the stuffing box leak and wearing through the wall of the rising main (UK) or the drop-pipe...

A stuffing box or packing is used to seal the joint between the vessel where the medium is transferred and the plunger or piston. A stuffing box may...

replaced journal bearings for interchange Rotation around a fixed axis Stuffing box Timmis system, an early form of coil spring used on railway axles. Train...

and test methods. GOST 8752-79. CIS standard for rotary shaft seals. Stuffing box Gland seal "GFS Rotary Seals". Gallagher Seals. Retrieved 5 August 2021...

located outside the pressurized volume. In some cases, a rod through a stuffing box can be used to operate a switch, but this creates high drag and has a...

and piston rod, suction valve and discharge valve with their seats, stuffing box (only in double-acting pumps), gland (only in double-acting pumps), pulsation...

driving machinery inside, passing through at least one shaft seal or stuffing box where it intersects the hull. The thrust, the axial force generated by...

the cylinder for the piston rod, and this is fitted with a gland or "stuffing box" to prevent escape of the working fluid. Double-acting cylinders are...

in the first half of the 20th century for medium speed applications. Stuffing box: A sealing system used to keep fluid from leaking out of a pressurized...

Ukraine, which are transparent to prevent pre-stuffing the box with fake ballots Small (mobile) ballot box in Ukraine, for voting outside of polling station...

that will bend the shaft or cause uneven wear. The inboard end has a stuffing box that prevents water from entering the hull along the tube. Some early...

inside a rubber hose, which entered the body of the Bathysphere through a stuffing box. After the initial version of the sphere had been cast in June 1929,...

reliability. The magnetic coupling has several advantages over a traditional stuffing box. Some aquariums use magnetic drive pumps, which have a magnetic coupling...

always the same diameter allowing for a single unmoving primary barrier (stuffing box or stripper), snubbing uses a pipe, which will have an enlarged collar...

telescopic suspension forks for motorcycles and bicycles. Gland (engineering) Stuffing box Fitch, E. C. (2013). Proactive Maintenance for Mechanical Systems. p...

sensors, vibrations sensors, and proximity probes. Seal (mechanical) Stuffing box Abubakar, I J (2016), Constitutive Modelling of Elastomeric Seal Material...

box and a plentiful volume was important for cooling purposes too. Although lignum vitae wood was used for the radial stave bearings in the stuffing box...

of the Order of St Olav Balanced Slid-Valve: July 4, 1882 - US260612 Stuffing Box: August 5, 1890 - US433824 Water Heater: December 30, 1890 - US443797...

run immersed in water, allowing its use outboard of the stern gland or stuffing box. Stave bearings are also well suited to applications such as rudder shafts...

somewhat restricted space available in "old" DIN and ASME-standardized stuffing boxes places limits on the type of seal that fits. Unless the pump user upgrades...