engineering, a transfer function (also known as system function or network function) of a system, sub-system, or component is a mathematical function that models...

specific transfer functions to describe the relationship between electrical signal, scene light and displayed light. The opto-electronic transfer function (OETF)...

The optical transfer function (OTF) of an optical system such as a camera, microscope, human eye, or projector is a scale-dependent description of their...

In control theory, a proper transfer function is a transfer function in which the degree of the numerator does not exceed the degree of the denominator...

The contrast transfer function (CTF) mathematically describes how aberrations in a transmission electron microscope (TEM) modify the image of a sample...

branches of engineering, a transfer function matrix, or just transfer matrix is a generalisation of the transfer functions of single-input single-output...

the sensitivity function) of a control system measures how variations in the plant parameters affects the closed-loop transfer function. Since the controller...

system is represented in transfer function form, the minimum number of state variables is equal to the order of the transfer function's denominator after it...

A head-related transfer function (HRTF) is a response that characterizes how an ear receives a sound from a point in space. As sound strikes the listener...

In control theory, a closed-loop transfer function is a mathematical function describing the net result of the effects of a feedback control loop on the...

transfer functions, full or limited range, the Rec. 2020 wide color gamut and YCBCR or ICTCP as color space. SDR uses a gamma curve transfer function...

n} th-order low-pass filter is equal to the absolute value of the transfer function H n ( s ) {\displaystyle H_{n}(s)} evaluated at s = j ω {\displaystyle...

(typically functions). If we assume the controller C, the plant P, and the sensor F are linear and time-invariant (i.e., elements of their transfer function C(s)...

roll-off is −20 dB per decade (approximately −6 dB per octave.) The transfer function for the simplest low-pass filter, H ( s ) = 1 1 + α s , {\displaystyle...

the time domain). The frequency response is closely related to the transfer function in linear systems, which is the Laplace transform of the impulse response...

white point as the ITU-R BT.709 standard for HDTV, but a different transfer function (or gamma) compatible with the era's CRT displays, and assumes a viewing...

using LTI ("linear time-invariant") system theory revealing their transfer functions in the frequency domain and their impulse responses in the time domain...

q {\displaystyle b_{p,q}} are constant coefficients. To derive a transfer function for the system the 2d Z-transform is applied to both sides of the...

theory, a pole–zero plot is a graphical representation of a rational transfer function in the complex plane which helps to convey certain properties of the...

The z domain transfer function of an IIR filter contains a non-trivial denominator, describing those feedback terms. The transfer function of an FIR filter...

i.e. by considering only some of the terms in the transfer function. The partial transfer function for signal components propagation via at least K {\displaystyle...

two-port network. These could be the forward transfer function, the input impedance, the reverse transfer function (i.e., the voltage appearing at the input...

function of the aberrations of the microscope. It is described by the contrast transfer function. The phase contrast transfer function is a function of...

than Chebyshev Type I/Type II and elliptic filters can achieve. A transfer function of a third-order low-pass Butterworth filter design shown in the figure...

different polynomial function to approximate to the ideal filter response. This results in each having a different transfer function. Another older, less-used...

The PDH readout function gives a measure of the resonance condition of a cavity. By taking the derivative of the cavity transfer function (which is symmetric...

is used to illustrate connections between resonance and a system's transfer function, frequency response, poles, and zeroes. Building off the RLC circuit...

} Both transfer functions have a single pole located at s = − 1 R C . {\displaystyle s=-{\frac {1}{RC}}\,.} In addition, the transfer function for the...

Combining equations (2) and (3) gives Rearranging equation (4) gives the transfer function which typically describes a second-order linear time-invariant (LTI)...

response function. In functional terms, it is the spatial domain version (i.e., the inverse Fourier transform) of the optical transfer function (OTF) of...