The circuit topology of an electronic circuit is the form taken by the network of interconnections of the circuit components. Different specific values...

The circuit topology of a folded linear polymer refers to the arrangement of its intra-molecular contacts. Examples of linear polymers with intra-molecular...

consisting of electrical elements (e.g., voltage sources, current sources, resistances, inductances, capacitances). An electrical circuit is a network...

in a series or parallel topology. Whether a two-terminal "object" is an electrical component (e.g. a resistor) or an electrical network (e.g. resistors...

An RLC circuit is an electrical circuit consisting of a resistor (R), an inductor (L), and a capacitor (C), connected in series or in parallel. The name...

Network topology is the arrangement of the elements (links, nodes, etc.) of a communication network. Network topology can be used to define or describe...

electrical phenomena. Electrical systems are commonly described by means of a circuit diagram. These are network diagrams that describe the topology of...

Topology (from the Greek words τόπος, 'place, location', and λόγος, 'study') is the branch of mathematics concerned with the properties of a geometric...

Electrical resonance occurs in an electric circuit at a particular resonant frequency when the impedances or admittances of circuit elements cancel each...

In electrical engineering, an unbalanced circuit is one in which the transmission properties between the ports of the circuit are different for the two...

electrical current in a circuit. It is typically used to divert current away from a system or component in order to prevent overcurrent. Electrical shunts...

Electronic filter topology defines electronic filter circuits without taking note of the values of the components used but only the manner in which those...

together. The circuit can act as an electrical resonator, an electrical analogue of a tuning fork, storing energy oscillating at the circuit's resonant frequency...

An electrical ballast is a device placed in series with a load to limit the amount of current in an electrical circuit. A familiar and widely used example...

of two network topologies: Linear topology: For example, A-B-C-D-E, A-B-C-D-E & C-M-N-O (branched at C) are daisy chain. Ring topology: there is a loop...

A bridge circuit is a topology of electrical circuitry in which two circuit branches (usually in parallel with each other) are "bridged" by a third branch...

In electrical circuit theory, a port is a pair of terminals connecting an electrical network or circuit to an external circuit, as a point of entry or...

analysis Ohm's law Kirchhoff's circuit laws Circuit diagram Circuit topology (electrical) Analysis of resistive circuits Source transformation Hayt, William...

stage. Switched-mode power supplies can be classified according to the circuit topology. The most important distinction is between isolated converters and...

lumped-element model simplifies the system or circuit behavior description into a topology. It is useful in electrical systems (including electronics), mechanical...

transformer circuit topology (i.e., both ports independently excited with no short-circuited port). The dual ported transformer circuit topology is known...

Electronic filters are a type of signal processing filter in the form of electrical circuits. This article covers those filters consisting of lumped electronic...

inverters are primarily used in electrical power applications where high currents and voltages are present; circuits that perform the same function for...

unchanged. Mesh analysis Ohm's law Kirchhoff's circuit laws Circuit diagram Circuit topology (electrical) Ybus matrix Charge conservation P. Dimo Nodal...

simulator, with subcircuit models that use the actual transistor topology of the integrated circuit, and finally, with inline Boolean logic expressions. Exact...

a bridge circuit, it is impossible to simultaneously ground the input and output of this circuit. The Delon circuit uses a bridge topology for voltage...

ratings. Diodes are also used in bridge topologies along with capacitors as voltage multipliers. The diode bridge circuit was invented by Karol Pollak and patented...

alternating topology, which means that CW TEs alternate with CCW TEs. Here's the same circuit in a stacked topology. The same equation applies to this circuit as...

temperature range of 100 °C. For this reason, in 2001, Malcovati designed a circuit topology that can compensate high-order non-linearities, thus achieving an improved...

A resistor–inductor circuit (RL circuit), or RL filter or RL network, is an electric circuit composed of resistors and inductors driven by a voltage or...