The Standard wet liner inline-four engine was an inline four cylinder petrol engine produced by the Standard Motor Company. Originally developed concurrently...

wider in back than the earlier model. The TR4 uses the same Standard wet liner inline-four engine that powered the TR2 and TR3 models, but with displacement...

aluminium outer skin. Power came from a 1,991 cc (121.5 cu in) Standard wet liner inline-four engine. Most cars were supplied with Laycock-de Normanville electric...

2.5 litre four-cylinder or a six-cylinder engine, the TR4A used the same long-stroke, high-torque Standard four-cylinder wet-sleeve engine as the TR4...

automobile engines. Later HDi engines are built as part of a joint-venture with Ford Motor Company. The DJ/DK is a family of inline-four diesel engines derived...

carried in five main bearings, two more than are in the Standard wet liner inline-four engine used in production TRs. The pistons are of die-cast aluminium...

series engine have been produced, offered in both inline-four and inline-six configurations in multiple displacements. The B-series features engine bores...

extras. The TR3 is powered by a 1,991 cc (121.5 cu in) Standard wet liner engine. This OHV straight-four initially produced 95 bhp (71 kW; 96 PS), an increase...

change from a four-cylinder engine to a six-cylinder engine in 1967. An all-new TR7, with a unit body, an overhead camshaft four-cylinder engine, and a live...

deliberate or not.[citation needed] The engine was the Standard wet liner inline-four engine. Dimensions were: Petrol engine, 80 mm bore × 92 mm stroke, capacity...

known to survive. The TR2 has a 1,991 cc (121.5 cu in) Standard wet liner inline-four engine from the Vanguard, fitted with twin H4 type SU Carburettors...

third-generation inline-sixes, the older engines had separate manifolds); as a result, they could not be easily modified for greater power. This engine had four main...

The spark-ignition petrol engines listed below operate on the four-stroke cycle, and unless stated otherwise, use a wet sump lubrication system, and are...

developing small diesel engines. The result was a wet-liner four-cylinder engine. Fuel injection equipment was from CAV, and the engine used Ricardo's Comet...

upgraded to steel pistons Cylinder liners: Iron The engine's timing components are located at the rear of the engine, and feature timing chains to drive...

heads with removable wet steel liners, and single overhead camshafts with two valves per cylinder. Initial designs for a V12 engine were produced by engineer...

gasoline engine's inlet valves. In February 2019, Jaguar Land Rover announced their long-rumoured inline-6 engine. Instead of being a conventional engine, the...

Atlas is a name for a family of modern inline piston engines for trucks from General Motors, used in the GMT355 and GMT360 platforms. The series debuted...

The compression ratio is 10.5:1. The 1.8L DOHC inline 4-cylinder engine served as the standard engine in the Dodge Caliber SE and SXT trim for the 2007–2009...

The Chevrolet 2300 is a 2.3 L; 139.6 cu in (2,287 cc) inline-four engine produced by the Chevrolet division of General Motors for the 1971 to 1977 model...

chairman of Standard-Triumph. Upon hearing Richardson's assessment, Black asked him to help redesign the car. Richardson tuned and modified the engine and worked...

The Mazda L-series is a mid-sized inline 4-cylinder gasoline piston engine designed by Mazda as part of their MZR family, ranging in displacement from...

The GM L3B engine is a turbocharged four-cylinder gasoline engine designed by General Motors. It is an undersquare aluminum DOHC inline-four displacing...

Cléon-Fonte engine is a family of inline four-cylinder automobile engines developed and manufactured by Renault. It has also been called the Sierra engine, the...

are now discontinued. All listed engines operate on the four-stroke cycle, and, unless stated otherwise, use a wet sump lubrication system and are water-cooled...

The TU family of small inline-four piston engines by PSA Peugeot Citroën were introduced in 1986 and used in the Peugeot and Citroën range of cars. It...

OM457 Engine is a 12.0 L (11,967 cc) displacement inline 6-cylinder 4-stroke Diesel engine. It is one of many motors in the 400 series of engines, being...

of G16A for worldwide market. The Suzuki G16B engine features an aluminum cylinder block with wet liners and aluminum cylinder head, cylinder bore and...

gasoline inline-four engine ranging in displacements from 1.3 L to 1.6 L. They are the evolution of the cast-iron block B-engine. The Z-engine has 16-valves...

GT models. The TS series are all twin cam 4-cylinder inline engines. The original 8-valve engine was derived from Alfa's Twin Cam family, and featured...