like extruder screws, spinnerets and static mixers. Thermal cleaning is the most common cleaning method in industrial environment. A variety of different...

Several cleaning methods Cleaning is the process of removing unwanted substances, such as dirt, infectious agents, and other impurities, from an object...

Several types of thermal cleaning systems use pyrolysis: Molten Salt Baths belong to the oldest thermal cleaning systems; cleaning with a molten salt...

Ultrasonic cleaning is a process that uses ultrasound (usually from 20 to 40 kHz) to agitate a fluid, with a cleaning effect. Ultrasonic cleaners come...

Thermal insulation is the reduction of heat transfer (i.e., the transfer of thermal energy between objects of differing temperature) between objects in...

Dry cleaning is any cleaning process for clothing and textiles using a solvent other than water. Clothes are instead soaked in a water-free liquid solvent...

Electrospinning Hollow fiber membrane Spinning (polymers) Textiles Thermal cleaning Spinneret Li, Norman N. (2008). Advanced membrane technology and applications...

sustainable source of clean energy, particularly in tropical regions with access to deep ocean water. OTEC uses the ocean thermal gradient between cooler...

A thermal power station is a type of power station in which heat energy is converted to electrical energy. In a steam-generating cycle heat is used to...

Thermal comfort is the condition of mind that expresses subjective satisfaction with the thermal environment. The human body can be viewed as a heat engine...

as the thermal flywheel effect. The thermal mass of heavy structural elements can be designed to work alongside a construction's lighter thermal resistance...

appliances. Cleaning of the duct system may be necessary if: Sweeping and dusting the furniture needs to be done more than usual. After cleaning, there is...

Fused deposition modeling Gravimetric blender Industrial finishing Thermal cleaning TEPPFA, The European Plastic Pipes and Fittings Association. "Production...

November 24, 1998, to Robert W. Glanville of Westfall Manufacturing. Thermal cleaning Paul, Edward L. (2004). Handbook of Industrial Mixing-Science and Practice...

themselvesPages displaying short descriptions of redirect targets Thermal cleaning – Industrial cleaning techniques Thermoforming – Manufacturing process for molding...

Thermal energy storage (TES) is the storage of thermal energy for later reuse. Employing widely different technologies, it allows surplus thermal energy...

Polymer science Printed electronics Seal (mechanical) Thermal barrier coating Thermal cleaning Thin-film deposition Thermosetting polymer Vitreous enamel...

than buoyancy forces (for example, a water pump in an automobile engine). Thermal expansion of fluids may also force convection. In other cases, natural...

power (CSP, also known as concentrating solar power, concentrated solar thermal) systems generate solar power by using mirrors or lenses to concentrate...

NTPC Limited, formerly known as National Thermal Power Corporation, is an Indian central Public Sector Undertaking (PSU) under the ownership of the Ministry...

Infrared thermography (IRT), thermal video and/or thermal imaging, is a process where a thermal camera captures and creates an image of an object by using...

that when used for cleaning it works like extremely fine sandpaper, getting into tiny grooves and pits in the object being cleaned. On a larger scale...

A thermal expansion valve or thermostatic expansion valve (often abbreviated as TEV, TXV, or TX valve) is a component in vapor-compression refrigeration...

as cranes, ships, bridges, and sluice-gates. In addition, thermal lancing is used to clean the bottom of steel furnace pots, which accumulate a skull...

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical...

cleaned periodically. Tubular heat exchangers can be cleaned by such methods as acid cleaning, sandblasting, high-pressure water jet, bullet cleaning...

is a colorless liquid widely used for dry cleaning of fabrics, hence it is sometimes called "dry-cleaning fluid". It also has its uses as an effective...

A thermal oxidizer (also known as thermal oxidiser, or thermal incinerator) is a process unit for air pollution control in many chemical plants that decomposes...

Solar thermal energy (STE) is a form of energy and a technology for harnessing solar energy to generate thermal energy for use in industry, and in the...

A solar thermal collector collects heat by absorbing sunlight. The term "solar collector" commonly refers to a device for solar hot water heating, but...