Manifold injection is a mixture formation system for internal combustion engines with external mixture formation. It is commonly used in engines with spark...

A fuel injection system that uses external mixture formation is called a manifold injection system. There exist two types of manifold injection systems:...

chamber. This is distinct from manifold injection systems, which inject fuel into the intake manifold (inlet manifold). The use of GDI can help increase...

Stroke (mm): 85 × 79.2 Compression ratio: 9.4:1 Multi-point intake manifold injection Turbocharger model: TD04 Peak power: 120 kW (161 hp; 163 PS) Peak...

lower pressure manifold injection systems) or high-pressure mechanical pumps mounted on the engine (for high-pressure direct injection systems). Some...

Jetronic is a trade name of a manifold injection technology for automotive petrol engines, developed and marketed by Robert Bosch GmbH from the 1960s onwards...

in a carburetor, or a fuel injector in a manifold injection system atomizing fuel into the intake manifold or intake runners as in a petrol engine)....

primary function of the intake manifold is to evenly distribute the combustion mixture (or just air in a direct injection engine) to each intake port in...

engine includes fully sequential electronic multi-point fuel injection with intake manifold-sited fuel injectors, mapped direct ignition system with solid-state...

air is free to fill the intake manifold, increasing the pressure (filling the vacuum). A carburetor or fuel injection system adds fuel to the airflow...

Technology Motronic for manifold injection Bosch Automotive Technology Electronic throttle control (ETC/EGAS) for manifold injection Hutton, Ray (1 September...

per cylinder, a compression ratio of 9:1 and featured multi-port manifold injection. It made 133ps (98 kw; 131 bhp) and 152 Nm (112.11 lb-ft) of torque...

overhead camshafts (SOHC) and a Bosch-made intermittent multi point manifold injection, and developed 250 PS (184 kW; 247 hp). The 600 used what Mercedes...

gasoline-fueled, spark plug ignition engine of any kind produced with manifold injection. It was typically rated at 37 kW (50 hp). First produced in 1906 it...

8–2.0 L Manifold injection N43 Inline-four N.A. 2007–2011 1.6–2.0 L Direct injection N13 Inline-four turbo 2011–2015 1.6 L Direct injection N20 Inline-four...

The Bendix Electrojector is an electronically controlled manifold injection (EFI) system developed and made by Bendix Corporation. In 1957, American Motors...

Secondary air injection (commonly known as air injection) is a vehicle emissions control strategy introduced in 1966, wherein fresh air is injected into...

intake manifolds Ignition system: Electronic ignition system with three spark plugs per rotor Fuel system: Nippon Denso electronic manifold injection Lubrication...

stroke along with different pistons, a different air intake manifold and exhaust manifolds as well as custom engine programming. It has a bore of 93 mm...

"Performance characteristics of a Hydrogen Fueled SI Engine using Timed Manifold Injection". International Journal of Hydrogen Energy. 16 (2): 115–127. Bibcode:1991IJHE...

included advanced features, including then called "direct petrol injection" manifold injection, and evaporative engine cooling. Levavasseur experimented with...

crankshaft and gearbox are combined in one housing - and has intake manifold injection; The alternator is on the right of the crankshaft, the primary drive...

The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in an internal combustion engine's electronic control system. Engines that...

plastic intake manifold fuel system, ignition system & management common-rail multi-point electronic sequential indirect fuel injection (MPI) with three...

intake manifold. Some variants use multi-port fuel injection, some have D4 direct injection, and others have a combination of direct injection and multi-port...

started in 1991 in Kopřivnice. It has a Tatra 623 V8 engine with inlet manifold injection producing 225 kW at 6500 rpm. It accelerates from 0–100 km/h (62 mph)...

engine is Volkswagen Group's 1.9-litre Pumpe-Düse Turbocharged Direct Injection diesel engine, producing 96 kW (130 PS) and 310 N⋅m (229 lb⋅ft) at 1900...

carburetor to fuel injection without significantly altering the intake manifold design. More complex later designs use intake manifolds, and even cylinder...

motorcycle with multi-point injection; the VFR800FI. The PGM-FI system relies on a piezoelectric sensor to measure intake manifold air pressure, then combines...

In internal combustion engines, water injection, also known as anti-detonant injection (ADI), can spray water into the incoming air or fuel-air mixture...