Metallurgical failure analysis is the process to determine the mechanism that has caused a metal component to fail. It can identify the cause of failure...
15 KB (1,700 words) - 20:55, 22 May 2025
Failure analysis is the process of collecting and analyzing data to determine the cause of a failure, often with the goal of determining corrective actions...
15 KB (1,765 words) - 03:35, 31 July 2024
CALPHAD Carbonyl metallurgy Cupellation Experimental archaeometallurgy Forging Goldbeating Gold phosphine complex Metallurgical failure analysis Metalworking...
37 KB (3,990 words) - 16:15, 4 May 2025
Corrosion engineering (category Metallurgy)
engineering Metallurgical failure analysis National Institute of Standards and Technology Stainless steel Stress corrosion cracking Structural failure Sulfide...
58 KB (6,197 words) - 21:14, 22 May 2025
Fatigue (material) (redirect from Fatigue (failure mode))
cases there is a runout where the time to failure exceeds that available for the test (see censoring). Analysis of fatigue data requires techniques from...
64 KB (8,379 words) - 17:56, 23 May 2025
Slope stability (redirect from Slope failure)
to failure by sliding or collapsing. The main objectives of slope stability analysis are finding endangered areas, investigation of potential failure mechanisms...
24 KB (3,367 words) - 02:16, 3 April 2025
Electron microprobe (section Meteorite analysis)
electron microprobe is widely used for research, quality control, and failure analysis. This technique is most commonly used by mineralogists and petrologists...
28 KB (3,469 words) - 08:13, 16 May 2025
to failure by sliding or collapsing. The main objectives of slope stability analysis are finding endangered areas, investigation of potential failure mechanisms...
43 KB (4,875 words) - 15:53, 22 April 2025
Low-cycle fatigue (category Mechanical failure)
material in greater depth to better understand the complex mechanical and metallurgical phenomena (crack propagation, work softening, strain concentration,...
9 KB (1,233 words) - 14:34, 8 April 2025
ASM International (society) (category Metallurgical organizations)
Thermal Spray Technology (JTST) Metallography, Microstructure, and Analysis (MMA) Metallurgical and Materials Transactions A and B (MetTransA & MetTransB) Shape...
7 KB (495 words) - 00:29, 13 February 2025
The Research and Analysis Wing (R&AW) is the foreign intelligence agency of India. The agency's primary function is gathering foreign intelligence, counter-terrorism...
183 KB (16,543 words) - 11:53, 20 May 2025
hydrogen embrittlement model". Engineering Failure Analysis. 58 (Recent case studies in Engineering Failure Analysis): 485–498. doi:10.1016/j.engfailanal.2015...
38 KB (4,286 words) - 08:02, 8 May 2025
Liquidus and solidus (category Metallurgy)
Tangstad, Merete (2011-04-02). "Liquidus of Silicon Binary Systems". Metallurgical and Materials Transactions B. 42 (4). Springer Science and Business...
10 KB (1,149 words) - 04:14, 19 November 2024
Air France Flight 066 (category Airliner accidents and incidents caused by engine failure)
underway to determine the cause of the engine failure, including representatives of the Bureau of Enquiry and Analysis for Civil Aviation Safety (BEA, the French...
21 KB (1,973 words) - 13:26, 1 May 2025
Materials science (redirect from Metallurgy & Materials Engineering)
nanotechnology, biomaterials, and metallurgy. Materials science is also an important part of forensic engineering and failure analysis – investigating materials...
64 KB (6,723 words) - 00:28, 2 May 2025
Air Algérie Flight 6289 (category Airliner accidents and incidents caused by mechanical failure)
part. This in turn caused a massive drop in engine rotation speed. Metallurgical analysis on the nozzle guide vanes of the high pressure part revealed that...
32 KB (3,920 words) - 16:16, 19 April 2025
Mechanical engineering (section Structural analysis)
mechatronics, and nanotechnology. It also overlaps with aerospace engineering, metallurgical engineering, civil engineering, structural engineering, electrical engineering...
61 KB (6,958 words) - 22:25, 19 May 2025
The Hoek–Brown failure criterion is an empirical stress surface that is used in rock mechanics to predict the failure of rock. The original version of...
5 KB (665 words) - 15:08, 6 April 2025
Condom (redirect from Condom failure)
16 June 2022. U.S. patent 1423525A, U.S. patent 1423526A "Chemical & Metallurgical Engineering 1930-02: Vol 37 Iss 2". Access Intelligence LLC. February...
128 KB (13,242 words) - 00:33, 1 May 2025
strain rate on the hydrogen-induced intergranular rupture in alloy 600". Metallurgical and Materials Transactions A. 35 (2). Springer Science and Business...
11 KB (1,285 words) - 11:55, 20 March 2025
X-ray crystallography (redirect from X-ray diffraction analysis)
general involves the coexistence of two or more species or conformations. Failure to recognize disorder results in flawed interpretation. Pitfalls from improper...
113 KB (11,750 words) - 13:53, 23 May 2025
He graduated with a degree in Metallurgical Engineering in 1987. John worked in the space program at a failure analysis lab in Irvine, California, and...
2 KB (269 words) - 00:21, 3 January 2025
Fracture (redirect from Brittle failure)
the extreme statistics of failure (bigger sample volume can have larger defects due to cumulative fluctuations where failures nucleate and induce lower...
25 KB (3,137 words) - 09:24, 24 March 2025
Proceedings from the 30th International Symposium for Testing and Failure Analysis, November 14-18, 2004 Worcester, Massachusetts. http://www.dfrsolutions...
4 KB (572 words) - 04:41, 22 August 2024
internal plane for analysis. They are commonly prepared for research, manufacturing quality assurance, supplier conformity, and failure analysis. Printed wiring...
7 KB (822 words) - 17:11, 29 January 2025
9-11 NIST NCSTAR 1-2B: appendixes NIST NCSTAR 1-3: Mechanical and Metallurgical Analysis of Structural Steel NIST NCSTAR 1-3A: Contemporaneous Structural...
35 KB (3,734 words) - 13:07, 20 May 2025
Sustained load cracking (category Diving equipment failure modes)
Sustained load cracking, or SLC, is a metallurgical phenomenon that occasionally develops in pressure vessels and structural components under stress for...
7 KB (599 words) - 15:43, 10 January 2024
chemistry and biochemistry) and even be applied to the solid phases (e.g. metallurgy and alloys) when solid impurities segregate from a solid phase. The precipitation...
12 KB (1,307 words) - 19:15, 21 January 2025
Air Moorea Flight 1121 (category Airliner accidents and incidents caused by mechanical failure)
by the Bureau of Enquiry and Analysis for Civil Aviation Safety (BEA). Following analysis of the CVR and metallurgical testing of the parts, the BEA...
13 KB (1,371 words) - 18:23, 9 May 2025
Slip bands in metals (category Mechanical failure modes)
alloys: Dependence on microstructure and orientation relationships". Metallurgical and Materials Transactions A. 26 (7): 1745–1756. Bibcode:1995MMTA.....
52 KB (5,233 words) - 12:19, 22 May 2025