A leaf spring is a simple form of spring commonly used for suspension in wheeled vehicles. Originally called a laminated or carriage spring, and sometimes...

A Corvette leaf spring is a type of independent suspension that utilizes a fiber-reinforced plastic (FRP) mono-leaf spring instead of more conventional...

The Chevrolet Corvette is a line of American two-door, two-seater sports cars manufactured and marketed by General Motors under the Chevrolet marque since...

the spring only acts as a spring member. The AC Cobra is an example of a transverse, multi-leaf steel spring suspension that uses the leaf spring as the...

Multi-leaf springs are widely used for the suspension of cars, trucks and railway wagons. A multi-leaf spring consists of a series of flat plates, usually...

build up the leaf springs is by using an add-a-leaf. This is done by inserting an extra leaf into the vehicle's leaf pack. Using the add-a-leaf will increase...

Transverse leaf spring front suspension is a type of automotive front suspension, whose usage is most well known in Ford Motor Company products from 1908...

rack and pinion steering while still using transverse leaf spring suspension (with the leaf spring doubling as the upper suspension link). The new car entered...

resistance. Spring-based shock absorbers commonly use coil springs or leaf springs, though torsion bars are used in torsional shocks as well. Ideal springs alone...

just a spring Trampoline Upholstery coil springs Vehicle suspension, Leaf springs Shock absorber Slinky, helical spring toy Volute spring "spring". Oxford...

material (as in a Tic Tac box's lid). Leaf spring: Leaf Springs are commonly used in vehicle suspensions. Leaf springs are an example of a flexure system...

approximately 1750, leaf springs began appearing on certain types of carriage, such as the Landau. By the middle of the 19th century, elliptical springs might additionally...

principle remains the same. The metal spring (coil or leaf) is removed, and an air bag, also referred to as an air spring, is inserted or fabricated to fit...

neither proposal was adopted, and Krupp instead equipped it with a simple leaf spring double-bogie suspension, with eight rubber-rimmed road wheels per side...

split lengthwise and splayed slightly, a tip of four leaf springs, a cylinder with a single leaf spring on one side, a bundle of stiff wire, a central pin...

the Wrangler TJ onwards, all Wranglers were fitted with coil-spring instead of leaf-spring suspension, the automatic shifter was relocated to the floor...

fiberglass mono-leaf spring combined with struts in the rear. The "generation 1.5" W-body models had updated rear suspensions that used coil springs instead of...

GMT820/830 SUV models used a five-link coil-spring suspension. (The 2500-series GMT830 SUV models retained a leaf spring suspension.) The GMT800 was the first...

Hotchkiss drive is the fact that the axle housing is firmly attached to the leaf springs to transfer the axle torque through them to the car body. Also, it uses...

than the liner acts like the leaf spring/lock bar. Another variation, known as the inset Linerlock has the leaf spring embedded into the plastic scales...

brakes, conventional leaf springs at the rear and wishbone type independent front end. The front end used a single transverse leaf spring. In Japan the car...

independent suspension all around, with MacPherson struts and a transverse leaf spring at the front, and a coil sprung semi trailing arm design at the rear...

principal mechanical changes were: coil spring (instead of leaf spring) live front axle; longer rear leaf springs; 5-bolt wheels instead of 6-bolt wheels;...

front, the Model 48 has a stub-type beam axle with a single transverse leaf spring, and a single, triangular-shaped combined longitudinal and transverse...

larger, and with a turret mounting a 20 mm autocannon anti-tank gun and leaf spring suspension Production began in 1935, but it took another eighteen months...

rear idler and two track return rollers. The wheels were mounted on a leaf-spring double-bogie mounted on two axles. In 1935, the Czechoslovak tank manufacturer...

agreement for West Coast events. It was built with a traditional frame and leaf-spring suspension chassis with a fiberglass body. After Koberna's franchise...

A Panhard rod is typically used with coil spring suspensions; with a leaf spring suspension, the springs themselves usually supply enough lateral rigidity...

trailing arm suspension with coil springs and hydraulic dampers at front and swing axles with a transverse leaf spring at the rear. The 8C 2900A was shown...

The suspension consists of a leaf spring for the two front wheels, while the rear treads had vertical volute springs. With a fuel capacity of 60 US...