A loudspeaker enclosure or loudspeaker cabinet is an enclosure (often rectangular box-shaped) in which speaker drivers (e.g., woofers and tweeters) and...

A transmission line loudspeaker is a loudspeaker enclosure design which uses the topology of an acoustic transmission line within the cabinet, compared...

A loudspeaker (commonly referred to as a speaker or, more fully, a speaker system) is a combination of one or more speaker drivers, an enclosure, and electrical...

(also known as a ported, vented box or reflex port) is a type of loudspeaker enclosure that uses a port (hole) or vent cut into the cabinet and a section...

waves to the open air. Another type is a woofer driver mounted in a loudspeaker enclosure which is divided by internal partitions to form a zigzag flaring...

compound enclosure has two chambers. The dividing wall between the chambers holds the driver; typically only one chamber is ported. If the enclosure on each...

speaker enclosure (cabinet), often with a built-in amplifier. Subwoofers are made up of one or more woofers mounted in a loudspeaker enclosure—often made...

A speaker enclosure using a passive radiator usually contains an "active loudspeaker" (or main driver), and a passive radiator (also known as a "drone...

a loudspeaker cabinet (or simply "speaker".). For high fidelity reproduction of sound, multiple loudspeakers are often mounted in the same enclosure, each...

and is both assisted and complicated by the necessity of using a loudspeaker enclosure to couple the cone motion to the air. If done well, many of the...

input impedance and the sound output of a system comprising a loudspeaker and enclosure. Many of the parameters are strictly defined only at the resonant...

An isobaric loudspeaker is a loudspeaker in which two or more identical woofers (bass drivers) operate simultaneously, with a common body of enclosed air...

Magazine in 1952 and thereafter. The Transmission line type of loudspeaker enclosure was proposed in October 1965 by Dr A.R. Bailey and A.H. Radford...

audio. A powered loudspeaker works the same way as a passive speaker, but the power amplifier is built into the loudspeaker enclosure. This design is common...

He is known for the commonly used Thiele/Small parameters for loudspeaker enclosure design, which are named after Small and his colleague Neville Thiele...

An electrostatic loudspeaker (ESL) is a loudspeaker design in which sound is generated by the force exerted on a membrane suspended in an electrostatic...

complete system comprising the audio crossover and the loudspeaker drivers in their enclosure(s) is the design goal. Such a goal is often achieved using...

state of Kentucky, US War cabinet, typically set up in wartime Loudspeaker enclosure Computer case A slotted screwdriver blade type Serving area interface...

electrostatic headphones. The loudspeaker's cabinet is known as the enclosure. There are a variety of loudspeaker enclosure designs, including sealed cabinets...

sealed enclosure of about 1.7 cu ft (48 L) to provide the restoring force for the woofer cone. The entrapped air of the sealed-loudspeaker enclosure, unlike...

than loudspeaker enclosures containing physically separated drivers. As well, the pattern of response is symmetric around the axis of the loudspeaker. Since...

inexpensive multimedia loudspeakers to more costly esoteric systems, the latter often using large transmission line or horn loaded enclosures to increase low...

industrial designer. The 1976 DM6 loudspeaker incorporated Kevlar cones and introduced updates to filter and enclosure design. That same year, the company...

The Voigt pipe is a type of loudspeaker enclosure that embodies a combination of transmission line, ported enclosure and horn characteristics. It is highly...

an active high fidelity loudspeaker system which was developed by the Dutch Philips brand in the early 1970s. The loudspeakers have built-in amplifiers...

Loudspeaker enclosure being constructed out of MDF...

airborne sound Components in a loudspeaker enclosure used to negate the out-of-phase sound waves from the rear of the loudspeaker Components in a suppressor...

A tweeter or treble speaker is a special type of loudspeaker (usually dome, inverse dome or horn-type) that is designed to produce high audio frequencies...

waveguide methods, such as a large pipe organ or, for reproduction, exotic loudspeaker designs such as transmission line, rotary woofer, or traditional subwoofer...

used to adjust the tuning frequency of the loudspeaker enclosure. In this sense, a loudspeaker enclosure with passive radiators emulates a mass-spring...