Canadarm or Canadarm1 (officially Shuttle Remote Manipulator System or SRMS, also SSRMS) is a series of robotic arms that were used on the Space Shuttle...

arm is a larger, more advanced version of the Space Shuttle's original Canadarm. Canadarm2 is 17.6 m (58 ft) when fully extended and has seven motorized...

rocket boosters for Endeavour. After its decommissioning, Endeavour's Canadarm (formally the 'Shuttle Remote Manipulator System') was removed in order...

manipulator arms, one large and one small, broadly similar to the Space Shuttle Canadarm and International Space Station Canadarm2, and associated dextrous manipulator...

human hand, i.e. with independent fingers and thumbs. .. In space, the Canadarm and its successor Canadarm2 are examples of multi degree of freedom robotic...

defines Canada, followed by ice hockey, the national flag, the beaver, the Canadarm, Canada Day, and Canadian Forces peacekeeping. Canada's most well known...

Station (ISS), and is a pioneer in space robotics, having constructed the Canadarm, Canadarm2, Canadarm3 and Dextre robotic manipulators for the ISS and NASA's...

bought the space robotics division of Spar Aerospace—manufacturer of the Canadarm—in March 1999, renaming it MD Robotics. The company completed the Mobile...

Canadian technological contributions to space exploration include the Canadarm on the Space Shuttle and Canadarm2 on the International Space Station....

operate in the payload bay or be deployed by the Remote Manipulator System (Canadarm) as a free-flying satellite. It carried 10 experiments to study formation...

other experiments including the Shuttle robotic arm, commonly known as Canadarm. Other experiments or tests included Shuttle Multispectral Infrared Radiometer...

decommissioned, with the intention that this would act as a successor to the ISS. Canadarm 2 will also help to berth the Axiom Space Station modules to the ISS and...

Columbia Challenger Discovery Atlantis Endeavour Add-ons Spacelab (ESA) Canadarm (CSA) Extended Duration Orbiter Remote Controlled Orbiter Spacehab Multi-Purpose...

Davis moved the wrist joint on the Remote Manipulator System (RMS) arm (Canadarm) to try to point WSF's Horizon Sensor into the Sun in an attempt to warm...

Spacesystems". December 5, 2007. Retrieved May 14, 2013. "MDA Selling Canadarm Business to U.S. Firm". CBC News. January 8, 2008. Retrieved February 21...

used in cooperation with NASA's Space Shuttle program, most notably the Canadarm, a remote manipulator system. The company went through a series of changes...

Weasel all-terrain vehicle, the STEM antenna for the space program, and the Canadarm. Klein worked for forty years as a mechanical engineer at the National...

program developed the Shuttle Remote Manipulator System (SRMS), or Canadarm 2. The Canadarm 1 was developed by a team led by Spar Aerospace Special Products...

develop the Shuttle Remote Manipulator System (RMS), also known as the "Canadarm" or robot arm. She was the first woman to serve as a CapCom. By early 1982...

after launch. The Orbiter Boom Sensor System, a camera on the end of the Canadarm, was added to allow the crew to inspect the orbiter for any tile damage...

Endeavour.: III-366–368  The Remote Manipulator System (RMS), also known as Canadarm, was a mechanical arm attached to the cargo bay. It could be used to grasp...

free-flying stainless steel disk. The WSF was deployed using the Space Shuttle's Canadarm. The WSF then used nitrogen gas thrusters to position itself about 55 km...

The "Canada" wordmark on the Canadarm...

Musgrave, anchored on the end of the Canadarm, prepares to be elevated to the top of the Hubble Space Telescope to install protective covers on the magnetometers...

LC-39A Edwards First reuse of a crewed orbital space vehicle First test of Canadarm robot arm Truncated due to fuel cell problem Shortest orbital mission flown...

inspection of the Shuttle's impacted starboard side using the Shuttle's Canadarm robot arm, but the limited resolution and range of the cameras made it...

Astronaut Office representative for the development and testing of the Canadarm remote manipulator system and the testing of payload bay door contingency...

"work station" foot restraint at the end of the Remote Manipulator System (Canadarm). On the seventh day of the mission, both astronauts performed another...

Artemis to provide nanosatellite solutions and exploration support for crewed Artemis missions. MDA  Canada Brampton, Ontario Lunar Gateway Canadarm 3...

MacDonald Dettwiler (MDA), the Canadian aerospace company that built the Canadarm and RADARSAT, were responsible for the engineering design and building...