A chamfer (/ˈʃæm.fər/ or /ˈtʃæm.fər/) is a transitional edge between two faces of an object. Sometimes defined as a form of bevel, it is often created... 7 KB (916 words) - 10:25, 7 April 2024 |
chamfer plane is a specialised plane used In woodworking for making chamfered edges. "Tools". swingleydev.com. Swingley, Christopher (2002). "Chamfer... 844 bytes (47 words) - 15:16, 31 October 2023 |
that is not perpendicular to the faces of the piece. The words bevel and chamfer overlap in usage; in general usage they are often interchanged, while in... 5 KB (589 words) - 20:21, 8 January 2024 |
Lark's tongue may refer to: Lark's tongue (chamfer), a special type of chamfer end. Larks' Tongues in Aspic, a 1973 album by King Crimson Larks' Tongues... 375 bytes (92 words) - 02:27, 11 June 2019 |
name given to the cutter, the surface being generated may be a conical chamfer (plunging applications) or a beveled corner for the intersection of two... 8 KB (980 words) - 20:30, 6 March 2024 |
construction of masonry buildings, a fire cut or fireman's cut is a diagonal chamfer of the end of a joist or beam where it enters a masonry wall. If the joist... 972 bytes (130 words) - 18:42, 25 March 2023 |
interior or exterior corner, with an angle or type of bevel, is called a "chamfer". Fillet geometry, when on an interior corner is a line of concave function... 3 KB (413 words) - 11:32, 7 April 2024 |
windows frequently have canted sides. A cant is sometimes synonymous with chamfer and bevel. "cant" def. 5 and 10. Oxford English Dictionary Second Edition... 1 KB (143 words) - 09:09, 25 March 2022 |
moulder Hand saw and chisel Jointer equipped with a rabbet ledge Bevel Chamfer Dado Harper, Douglas. "rabbet, n". Online Etymology Dictionary. Retrieved... 2 KB (293 words) - 22:57, 18 February 2023 |
The headset is the set of components on a bicycle that provides a rotatable interface between the bicycle fork and the head tube of a bicycle frame. The... 24 KB (3,307 words) - 10:48, 13 August 2023 |
each having some advantages and disadvantages (see the table below). Chamfer finish are normally advocated for full metal margins and shoulders are... 69 KB (8,365 words) - 11:12, 11 February 2024 |
concrete finishers press an edger between the forms and the concrete to chamfer the edges so that they are less likely to chip. Broom and stamp finishes... 2 KB (258 words) - 04:34, 8 March 2023 |
3-dimensional plasma cutting can also be used to create countersunk holes and chamfer edges of profiled holes. Used in the processing of tube, pipe or any form... 14 KB (1,920 words) - 19:53, 8 February 2024 |