field strength meter is an instrument that measures the electric field strength emanating from a transmitter. In ideal free space, the electric field...

In physics, field strength is the magnitude of a vector-valued field (e.g., in volts per meter, V/m, for an electric field E). For example, an electromagnetic...

SI unit for the electric field is the volt per meter (V/m), which is equal to the newton per coulomb (N/C). The electric field is defined at each point...

: 21  which is equivalent to newton per meter per ampere. The unit of H, magnetic field strength, is ampere per meter (A/m).: 22  B and H differ in how they...

Dead zone (cell phone) Dipole field strength in free space Field strength meter Received signal strength indicator S meter Signal Mobile phone signal Mobile...

Dipole field strength in free space, in telecommunications, is the electric field strength caused by a half wave dipole under ideal conditions. The actual...

the term dielectric strength has the following meanings: for a pure electrically insulating material, the maximum electric field that the material can...

electric current or voltage or of a magnetic, electric or electromagnetic field or mechanical system in the frequency range from around 20 kHz to around...

pattern Skew Television interference Testing Distortionmeter Field strength meter Vectorscope VIT signals Zero reference pulse Artifacts Dot crawl Ghosting...

system. Harmonic distortion may be expressed in terms of the relative strength of individual components, in decibels, or the root mean square of all harmonic...

amplifying device (such as a transistor or vacuum tube) that may increase the strength of the product signal. Active mixers improve isolation between the ports...

magnetic field, the field line angle in a vertical plane. Grid dip oscillator (GDO), also called grid dip meter, gate dip meter, dip meter, or just dipper...

distance between the transmitter and the receiver, usually measured in meters, and C {\displaystyle C} is a constant which accounts for system losses...

pattern Skew Television interference Testing Distortionmeter Field strength meter Vectorscope VIT signals Zero reference pulse Artifacts Dot crawl Ghosting...

pattern Skew Television interference Testing Distortionmeter Field strength meter Vectorscope VIT signals Zero reference pulse Artifacts Dot crawl Ghosting...

known as the decimetre band as the wavelengths range from one meter to one tenth of a meter (one decimeter). Radio waves with frequencies above the UHF...

magnetic field can run through to produce a current between the wires. Small loops may exist between wires twisted together, but the magnetic field going...

30 to 300 megahertz (MHz), with corresponding wavelengths of ten meters to one meter. Frequencies immediately below VHF are denoted high frequency (HF)...

[citation needed] A satellite finder (or sat finder) is a satellite field strength meter used to accurately point satellite dishes at communications satellites...

pattern Skew Television interference Testing Distortionmeter Field strength meter Vectorscope VIT signals Zero reference pulse Artifacts Dot crawl Ghosting...

pattern Skew Television interference Testing Distortionmeter Field strength meter Vectorscope VIT signals Zero reference pulse Artifacts Dot crawl Ghosting...

fields, if there were none, all beams would hit the screen near the center. The farther away from the center, the greater the strength of the field needed...

careful measurement of field strength. The loss resistance and efficiency of an antenna can be calculated once the field strength is known, by comparing...

pattern Skew Television interference Testing Distortionmeter Field strength meter Vectorscope VIT signals Zero reference pulse Artifacts Dot crawl Ghosting...

between spectra remains the same; some spectral components decrease in strength as others increase. If the frequency deviation is held constant and the...

enough that the power frequency/field rate mismatch was no longer important. Modern TV sets can display multiple field rates (50, 59.94, or 60, in either...

magnetic field strengths. Thus, doubling the propagation path distance from the transmitter reduces each of these received field strengths over a free-space...

pattern Skew Television interference Testing Distortionmeter Field strength meter Vectorscope VIT signals Zero reference pulse Artifacts Dot crawl Ghosting...

being NTSC and SECAM. In most countries it was broadcast at 625 lines, 50 fields (25 frames) per second, and associated with CCIR analogue broadcast television...

pattern Skew Television interference Testing Distortionmeter Field strength meter Vectorscope VIT signals Zero reference pulse Artifacts Dot crawl Ghosting...