A finger joint, also known as a comb joint, is a woodworking joint made by cutting a set of complementary, interlocking profiles in two pieces of wood...

the fingers has three joints: metacarpophalangeal joint (MCP) – the joint at the base of the finger proximal interphalangeal joint (PIP) – the joint in...

A mallet finger, also known as hammer finger or PLF finger or Hannan finger, is an extensor tendon injury at the farthest away finger joint. This results...

Jammed finger is a colloquialism referring to a variety of injuries to the joints of the fingers, resulting from axial loading beyond that which the ligaments...

Joint cracking is the manipulation of joints to produce a sound and related "popping" sensation. It is sometimes performed by physical therapists, chiropractors...

The interphalangeal joints of the hand are the hinge joints between the phalanges of the fingers that provide flexion towards the palm of the hand. There...

glued. The glued box joint has a high glued surface area resulting in a strong bond, on a similar principle to a finger joint. Box joints are used for corners...

April 2021. Retrieved 12 February 2021. Sayre, Alan (June 12, 2007). "Finger joint beat the odds on fish turf". Atlanta Journal-Constitution. p. D3. Archived...

commonly involved joints are the two near the ends of the fingers and the joint at the base of the thumbs, the knee and hip joints, and the joints of the neck...

mitred corner is desired Shiplap Bridle joint Halved joint Scarf joint Splice joint Finger joint Types of Timber Joints Used in Woodworking - Heaps of practical...

available for sawn lumber, the lumber must be end-jointed. The most common joint for this is a finger joint, 1.1 in (2.8 cm) in length that is cut on either...

metacarpophalangeal joints (MCP) are situated between the metacarpal bones and the proximal phalanges of the fingers. These joints are of the condyloid...

Joint replacement of the hand is a procedure that was invented by the Scottish scientist, Mitchell McGuire. The procedure was considered a major breakthrough...

processing, finger tracking is a high-resolution technique developed in 1969 that is employed to know the consecutive position of the fingers of the user...

has only been demonstrated for particular isolated implant designs. Finger joint replacement is a relatively quick procedure of about 30 minutes, but...

groundbreaking for field house". June 27, 2018. Sayre, Alan (June 12, 2007). "Finger joint beat the odds on fish turf". Atlanta Constitution. pp. D3. Retrieved...

the joints). Hypermobility syndrome can lead to chronic pain or even disability in severe cases. Musical instrumentalists with hypermobile fingers may...

similar to a bridle joint. Eg: Palatomaxillary suture. Denticulate sutures – the edges slot into each other as in a finger joint. Eg: Lambdoid suture...

Trigger finger, also known as stenosing tenosynovitis, is a disorder characterized by catching or locking of the involved finger in full or near full flexion...

Stanford University studied, in 1973, the frequency of hair on the middle finger joint (mid-phalangeal hair) of Solomon Islanders, as a part of a series of...

weatherboards. Some modern clapboards are made up of shorter pieces of wood finger jointed together with an adhesive. In North America clapboards were historically...

The knuckles are the joints of the fingers. The word is cognate to similar words in other Germanic languages, such as the Dutch "knokkel" (knuckle) or...

contains bone without joints; rarely it may be a complete functioning digit. The extra digit is most common on the ulnar (little finger) side of the hand...

disorders are conditions causing chronic, often intermittent pain affecting the joints or connective tissue. Rheumatism does not designate any specific disorder...

In Western culture, "the finger", or the middle finger (as in giving someone the (middle) finger, flipping the bird or flipping someone off) also represented...

joint inflammation, and swelling of the bone marrow; untreated, the course of "seal finger" is slow and results often in thickened contracted joint....

metacarpophalangeal joint of the hand. The joint allows for movement along one axis to produce bending or straightening of the finger, and movement along a second axis...

different types of joints an arachno-bot can equip. Such S.E.S. joints include a bidirectional joint, a three-fingered gripper joint, and a multi-segmented...

ulnar deviation of the fingers, through metacarpophalangeal joint (MCP) subluxation, primarily of the ring and little-finger. Joints in the feet, knees and...

technique of "finger-jointing" by using small solid pieces, usually 18 to 24 inches (460–610 mm) long, and joining them together using finger joints and glue...