The ISO metric screw thread is the most commonly used type of general-purpose screw thread worldwide. They were one of the first international standards...

A screw thread is a helical structure used to convert between rotational and linear movement or force. A screw thread is a ridge wrapped around a cylinder...

Coarse Thread (UNC or UN) and Unified Fine Thread (UNF or UF). Note: In countries other than the United States and Canada, the ISO Metric Screw Thread System...

a wide variety of other threaded fasteners used in these countries. It has the same 60° profile as the ISO metric screw thread, but the characteristic...

ISO screw thread may refer to: ISO metric screw thread ISO inch screw thread This disambiguation page lists articles associated with the title ISO screw...

properties of bolts, screws, and studs. It specifically applies to fasteners that have an ISO metric screw thread as defined in ISO 68-1. The properties...

generally used three thread sizes. The Unified Thread Standard (UTS) originates from the United States, while the ISO metric screw thread is standardized worldwide...

ISO 965 (ISO general purpose metric screw thread—tolerances) is an International Organization for Standardization (ISO) standard for metric screw thread...

Trapezoidal thread forms are screw thread profiles with trapezoidal outlines. They are the most common forms used for leadscrews (power screws). They offer...

standard fine thread (BSF) British Standard Pipe (BSP) ISO metric screw thread Unified Thread Standard (UTS, including UNC, UNF, UNS and UNEF) Gilbert...

producing threaded components. ISO metric screw thread "History of standardization" section of the screw thread article National pipe thread Degarmo, Black...

standards for screw threads that has been adopted internationally for interconnecting and sealing pipes and fittings by mating an external (male) thread with an...

The square thread form is a common screw thread profile, used in high load applications such as leadscrews and jackscrews. It gets its name from the square...

A thread gauge, also known as a screw gauge or pitch gauge, is used to measure the pitch or lead of a screw thread. Thread pitch gauges are used as a reference...

IEC metric screw sized connectors is a family of electrical connectors defined by IEC that are named according to their ISO metric screw thread, namely...

kitchenware tray and container sizes ISO metric screw thread, the international standard for machine screw threads "Application of Directives 75/106/EEC...

British Association screw threads, or BA screw threads, are a set of small screw threads, the largest being 0BA at 6 mm diameter. They were, and to some...

smaller thread series. Screw Screw thread Unified Thread Standard ISO metric screw thread British Standard Whitworth Adt, Howard (1920). Screw Thread Production...

engineering, the thread angle of a screw is the included angle between the thread flanks, measured in a plane containing the thread axis. This is a defining...

fastener. Metric sizes of the hex are specified by ISO 4032 and ISO 4033, plus ISO 4035 for Jam Nuts, and ISO 4014 and ISO 4017 for hex cap screws, ISO 4018...

assemblies. The usual T-mount is a screw mount using a male 42×0.75 (42 mm diameter, 0.75 mm thread pitch) metric thread on the lens with a flange focal...

Applications: Machine Screw Nuts; and Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)". ISO 262:1998 ISO general purpose metric screw threads – Selected...

these are non-standard threads, both ISO metric screw thread designations and UNC designations have been used to call out thread dimensions and fit (class)...

console design m2 or square metre, a unit of area M2, one of the ISO metric screw thread sizes M2 World Championship, the second esports Mobile Legends:...

and taps, imperial and metric, up to 36.5 millimetres (1.44 in) in diameter. In manufactured parts, holes with female screw threads are often needed; they...

Pitch-diameter micrometers (aka thread mics) have a matching set of thread-shaped tips for measuring the pitch diameter of screw threads. Limit mics have two anvils...

wood screw forces it into wood. In screw mechanisms, either the screw shaft can rotate through a threaded hole in a stationary object, or a threaded collar...

and services. ASTM A325 ISO metric screw thread Shear force Ultimate tensile strength ASTM F568M - 07, retrieved 2009-06-10. ISO 898-1:2009, 2009-04-01...

globular cluster in the constellation Ophiuchus M14, a size of ISO metric screw thread Magic 2014, a Magic: The Gathering expansion set Samsung Galaxy...

Scorpius constellation of stars Leica M4, a 1967 35 mm camera M4, an ISO metric screw thread Foton-M No.4, a Russian microgravity and bioscience research spacecraft...