abrasives in metal polishing results in what is considered a "mechanical finish". #1 Finish Annealed and descaled after hot rolling, this finish is suitable...

Brushed or dull polished metal is metal with a unidirectional satin finish. It is produced by polishing the metal with a 120–180 grit belt or wheel then...

beautify tools made for their own use. Bluing also helps to maintain the metal finish by resisting superficial scratching, and also helps to reduce glare to...

has a 25-inch (64 cm) barrel, a one-piece hardwood stock, and a blued metal finish. Model 511P The Model 511P had the same specs as the standard model but...

beechwood stock with a straight, slightly dropped comb, and a blued metal finish. It also uses notch and post sights. The Silhouette was designed for...

black cheatline) was in natural metal finish or painted light-grey. The engines retained their natural metal finish as well while the wings were red...

it and reflecting off the underlying metal surface. AMS 2488 Type II anodizing produces a thicker matte grey finish with higher wear resistance. Zinc is...

type of metal and thickness. However, it is hard to identify it after a finish is applied. Steel has low, medium or high carbon, with most metal furniture...

abrasives, until the desired finish is achieved. The rough (i.e. large grit) passes remove imperfections within the metal surface like pits, nicks, lines...

assemblies constructed by smiths themselves. Gunsmiths may also renew metal finishes or apply decorative carvings or engravings to guns. Many gun shops offer...

in place. Early m/45B models had the same metal finish as the m/45 but most had a dull green lacquer finish. Over time, most first production m/45's were...

they were worn with a metal finish, while the top part of the cuirass was covered in material (often velvet), the difference in finish making a contrast....

surface finish in manufacturing. In forming processes, such as molding or metal forming, surface finish of the die determines the surface finish of the...

Plating is a finishing process in which a metal is deposited on a surface. Plating has been done for hundreds of years; it is also critical for modern...

wheels with liquid metal finish and milled faces, windshield header frame, taillamp bezels and exterior badges with liquid metal finish; matte black splitter...

with rhodium or gold. Base metal costume jewellery may also be plated with silver, gold, or rhodium for a more attractive finish. Jewellery has been used...

000), and Singer (500). New M1911A1 pistols were given a parkerized metal finish instead of bluing, and the wood grip panels were replaced with panels...

Mill finish is the surface texture (or finish) of metal after it exits a rolling mill, extrusion die, or drawing processes, including sheet, bar, plate...

has a 25-inch (64 cm) barrel, a one-piece hardwood stock, and a blued metal finish. An unusual feature of this rifle is that it uses a tubular magazine...

Sportmaster 121 has a 25" barrel, a one piece hardwood stock, and a blued metal finish. It was replaced by the Model 572 Fieldmaster in 1955. 121A Standard...

for appliance products, often with a brushed finish.[citation needed] Aluminium is widely used in sheet metal form due to its flexibility, wide range of...

localized versions of the TV series. On July 12, 2008, Takara Tomy released Metal Fight: Beyblade, the second iteration of the toy. The third iteration, titled...

Ion implantation is used in semiconductor device fabrication and in metal finishing, as well as in materials science research. The ions can alter the elemental...

rear sight is drift-adjustable for windage. Metal finish is blued or nickel, and some special-order finishes such as engraved, silver- or gold-plated. Type...

produce a metal finish favored for its diffusion blocking character. Diffusion blocking is used to improve the long term adherence of different metals, e.g...

Metalworking is the process of shaping and reshaping metals in order to create useful objects, parts, assemblies, and large scale structures. As a term...

A number of heavy metal genres have developed since the emergence of heavy metal (often shortened to metal) during the late 1960s and early 1970s. At times...

electrodeposition, is a process for producing a metal coating on a solid substrate through the reduction of cations of that metal by means of a direct electric current...

was very popular in the USA until more modern but similar methods of metal finishes were introduced.: 393  The main types of phosphate coatings are manganese...

nothing but contempt and abuse for me. I just wanted... to finish Metal Gear! Kojima Productions. Metal Gear Solid 4: Guns of the Patriots. Raiden: Eastern Europe...