A plate girder bridge is a bridge supported by two or more plate girders. In a plate girder bridge, the plate girders are typically I-beams made up from...

girder bridge is a bridge that uses girders as the means of supporting its deck. The two most common types of modern steel girder bridges are plate and...

reinforced or prestressed. Such modern bridges include girder, plate girder, and box girder bridges, all types of beam bridges. Types of construction could include...

Larger girders (1 m/3 feet deep or more) are made as plate girders, welded or bolted together from separate pieces of steel plate. The Warren type girder replaces...

bridge over Narragansett Bay in Rhode Island Verrazano Bridge (Maryland), a plate girder bridge connecting Assateague Island in Maryland This disambiguation...

County, Minnesota. The current bridge was fully opened to traffic in October 2016, replacing a previous 1967 plate girder bridge. It is part of the Interstate...

Toll Bridge Commission (DRJTBC). The original bridge was a plate girder bridge constructed from 1958 to 1961, and the current structure is a box-girder bridge...

plates. Three cells were formed inside the concave (lower) face of this girder, again of riveted plates. Where a tubular girder is used as a bridge span...

A balloon flange girder or (colloquially) balloon topper is a form of vertical I-beam wrought iron plate girder, where the top flange, instead of being...

types of bridges. Cable-stayed suspension bridge "The five main bridge designs". ECL Civil Engineering. 21 March 2022. "Yavuz Sultan Selim Bridge, Istanbul...

bridge was built in 2001, replacing a plate girder bridge that was originally built in 1967 as a two-lane bridge for Minnesota State Highway 101 when the...

span Bridge seen from Spanish Harbor Key View underneath at Bahia Honda Key Plate girder sections on Spanish Harbor Key side View from the bridge in 1961...

The Ouse Bridge is a reinforced concrete plate girder bridge that spans River Ouse between Goole and Howden in the East Riding of Yorkshire, England....

The medium girder bridge (MGB) is a lightweight, man-portable bridge that can be assembled without help from heavy equipment. In addition, it is also...

development of larger rolled steel plates. It has been supplanted in modern construction with welded or bolted plate girders, which use more material but have...

The Ken Lockwood Gorge Bridge is a steel plate girder bridge built for the High Bridge Branch of the Central Railroad of New Jersey (CNJ) to cross the...

The Clarks Ferry Bridge is a plate girder bridge that carries U.S. Routes 22 and 322 across the Susquehanna River near Duncannon, Pennsylvania, about...

Gusset plate is a plate for connecting beams and girders to columns. A gusset plate can be fastened to a permanent member either by bolts, rivets or welding...

Viaduct, also known as the Hook bridge or Goole railway swing bridge, is a large viaducted hogback plate girder bridge with swing span over the River Ouse...

low-level bridge in November 1960, and on 12 April 1961, the main bridge was opened by the Premier of Victoria Henry Bolte. It is of a welded, steel girder concrete...

deck-type plate girder bridge. The bridge is supported by two abutments 100m apart and two piers located 25m from the abutments. The bridge deck is divided...

site in 1609, it was the longest plate girder arch and fixed arch bridge in the world when it opened in 1936. The bridge has two roadway levels carrying...

Chesterton, south of the A14 bridge. It is the third railway bridge to be built on this site, replacing a plain plate girder bridge which stood on the site...

Linville, the bridge has 46 spans: 25 deck plate girder, 14 deck truss, 6 through truss, and 1 through plate girder. 50,000 cubic yards (38,000 m3) of stone...

The George Abernethy Bridge, or simply Abernethy Bridge, is a steel plate and box girder bridge that spans the Willamette River between Oregon City and...

replaced a single-track swing bridge which opened on January 5, 1890. The current structure is a simple truss bridge with plate girder approaches and a bascule...

A bascule bridge (also referred to as a drawbridge or a lifting bridge) is a moveable bridge with a counterweight that continuously balances a span, or...

tubular bridge is a bridge built as a rigid box girder section within which the traffic is carried. Famous examples include the original Britannia Bridge over...

Northern Pacific-BNSF Minneapolis Rail Bridge is a combination plate girder bridge and truss bridge that spans the Mississippi River in Minneapolis, Minnesota...

East Hartford. When the 3,016 feet (920 m) bridge opened, it was the longest continuous plate girder bridge in the country. In 1948, the designation of...