The Rolls-Royce Turbomeca Adour is a two-shaft low bypass turbofan aircraft engine developed by Rolls-Royce Turbomeca Limited, a joint venture between...

The Rolls-Royce Turbomeca RTM322 is a turboshaft engine produced by Safran Helicopter Engines. It was originally conceived and manufactured by Rolls-Royce...

British aero-engine manufacturer Rolls-Royce and French helicopter engine specialist Turbomeca to develop the Adour, an afterburning turbofan engine,...

MTU Turbomeca Rolls-Royce GmbH (MTR) is a multinational engine manufacturer established to develop, manufacture, and service the MTR390 turboshaft engine...

The Rolls-Royce BR700 is a family of turbofan engines for regional jets and corporate jets. It is manufactured in Dahlewitz, Germany, by Rolls-Royce Deutschland:...

Rolls-Royce Pegasus Rolls-Royce Trent Rolls-Royce/Turbomeca Adour Turbo-Union RB199 LHTEC T800 (with Honeywell) MTR390 (with MTU and Turbomeca) Rolls-Royce...

British engine manufacturer Rolls-Royce Ltd, named Rolls-Royce Turbomeca Limited, was established to develop and produce the Adour turbojet engine to power...

The Rolls-Royce/Snecma Olympus 593 was an Anglo-French turbojet with reheat, which powered the supersonic airliner Concorde. It was initially a joint...

marketed by Rolls-Royce Turbomeca International Ltd as the AZ14 Rolls-Royce Turbomeca AZ16 The Astazou XVI marketed by Rolls-Royce Turbomeca International Ltd...

The General Electric/Rolls-Royce F136 was an advanced turbofan engine being developed by General Electric and Rolls-Royce plc for the Lockheed Martin F-35...

and built in the early 1970s by Turbo-Union, a joint venture between Rolls-Royce, MTU and Aeritalia. The only production application was the Panavia Tornado...

powerplant of the Eurofighter Typhoon. The engine is largely based on the Rolls-Royce XG-40 technology demonstrator, which was developed in the 1980s. The...

The MTU Turbomeca Rolls-Royce MTR390 is a turboshaft developed for light helicopter applications by MTU Turbomeca Rolls-Royce (MTR). The engine is designed...

formed between Rolls-Royce and Turbomeca to develop the Adour afterburning turbofan engine. The Br.121 was proposed with Turbomeca's Tourmalet engine...

The Turbomeca Arrius is one of a family of turboshaft engines for helicopter use, first produced in 1981. As of 2012, some 2,700 units had been sold....

Chetan Variants Rolls-Royce Turbomeca Adour Mk 811 — Engine for SEPECAT Jaguar, produced under licence Rolls-Royce Turbomeca Adour Mk 871 — Engine for...

RB.203 was a private venture engine built on the core of the Rolls-Royce Turbomeca Adour turbofan used in the SEPECAT Jaguar and the later Hawker Siddeley...

the powerplant options available for the Airbus A380, along with the Rolls-Royce Trent 900. Originally intended to power Boeing Commercial Airplanes'...

The Turbomeca Turmo is a family of French turboshaft engines manufacturered for helicopter use. Developed from the earlier Turbomeca Artouste, later versions...

The Rolls-Royce/MAN Turbo RB.153 was a high-performance 6,850 pounds-force (3,110 kgf) dry thrust turbofan engine developed jointly by Rolls-Royce Limited...

The Turbomeca Arriel is a series of French turboshaft engines that first ran in 1974. Delivering 650 to 1,000 hp (480 to 750 kW), over 12,000 Arriel engines...

The SNECMA Turbomeca Larzac is a military turbofan manufactured by GRTS (Groupement Turbomeca-SNECMA), a consortium between the two French companies, SNECMA...

F124 and the Rolls-Royce Turbomeca Adour (which was BAe's selection) to power the new trainers. In 1997 the RAAF elected to use the Adour engine, effectively...

and operations market for V2500 is close to US$3 billion as of 2015. Rolls-Royce based the 10-stage HP compressor on an 8-stage run in the RB401 in the...

concentric spray rings in the bypass flow. In comparison, the afterburning Rolls-Royce Spey used a twenty chute mixer before the fuel manifolds. Plenum chamber...

Rolls-Royce Limited was a British luxury car and later an aero-engine manufacturing business established in 1904 in Manchester by the partnership of Charles...

40% cheaper than 900kW competitors like the Honeywell/Rolls-Royce LHTEC CTS800 and the MTU/Turbomeca/R-R MTR390. The first test run was then expected in...

The Rolls-Royce/SNECMA M45H is an Anglo-French medium bypass ratio turbofan produced specifically for the twin-engined VFW-Fokker 614 aircraft in the...

The Turbomeca TM 333 is a turboshaft engine manufactured by French company Turbomeca and designed for helicopters weighing 4-5 tonnes. It first ran in...

The Turbomeca Makila is a family of French turboshaft engines for helicopter use, first run in 1976 and flown in 1977. Typical power output is around...