A scarf joint, or scarph joint, is a method of joining two members end to end in woodworking or metalworking. The scarf joint is used when the material...

alternative to other joints such as the butt joint and the scarf joint. Splice joints are stronger than unreinenforced butt joints and have the potential...

substitutes (such as laminate), to produce more complex items. Some woodworking joints employ mechanical fasteners, bindings, or adhesives, while others use only...

mitred corner is desired Shiplap Bridle joint Halved joint Scarf joint Splice joint Finger joint Types of Timber Joints Used in Woodworking - Heaps of practical...

dissatisfaction with the scarf joints and other systems of joining rails then in use. He noted that to form the scarf joint the rail was halved in thickness...

lecturer Phil Scarf, British statistician and professor Scarf, slang word for gulp or eat "wolfishly" (as in "scarfed down one's food") Scarf joint (also known...

(discontinued): This model has an alder neck-thru body and maple neck (with scarf joint head stock), and 22 jumbo frets. It is fitted with an EMG 81 humbucker...

finger joints is time-consuming and error prone hence rarely done except in craft pieces. A tapered or scarfed finger joint is the most common joint used...

wide, and 35 mm (1.4 inches) thick. This fragment preserves part of a scarf joint and most of one mortise, with a tenon peg hole. The ship's cargo, predominantly...

constructed of rosewood, oak, ash etc. that has been bent and then scarf jointed together; though some are also made of plywood or man-made materials...

be carved separately and glued to the neck using some sort of joint (such as a scarf joint). There are two major trends in headstock construction, based...

A dovetail joint or simply dovetail is a joinery technique most commonly used in woodworking joinery (carpentry), including furniture, cabinets, log buildings...

A mitre joint (often miter in American English) is a joint made by cutting each of two parts to be joined, across the main surface, usually at a 45° angle...

designates the fretboard's maple material. The DK2M also features a scarf joint to orient the Jackson 6-In-Line Pointed Headstock back at a 12-degree...

occurred in a joint within the eyebars – each of which had been forged from three separate pieces: two eyes and a bar. The scarf joint between the components...

A butt joint is a wood joint in which the end of a piece of material is simply placed (or “butted”) against another piece. The butt joint is the simplest...

SCARF syndrome is a rare syndrome characterized by skeletal abnormalities, cutis laxa, craniostenosis, ambiguous genitalia, psychomotor retardation, and...

form a joint with another piece of wood (often containing a dado). Rabbet joints are easy to construct, but are not as strong as some other joints. Nails...

A box joint is a woodworking joint made by cutting a set of complementary, interlocking profiles in two pieces of wood, which are then joined (usually)...

A bridle joint is a woodworking joint, similar to a mortise and tenon, in that a tenon is cut on the end of one member and a mortise is cut into the other...

This joint tends to be used because of its ability to hide unattractive gaps due to varying material thicknesses. Dado set Woodworking joints "Dado Case...

In light frame construction, a birdsmouth joint or bird's beak cut is a woodworking joint that is generally used to connect a roof rafter to the top plate...

A butterfly joint, also called a bow tie, dovetail key, Dutchman joint, or Nakashima joint, is a type of joint or inlay used to hold two or more pieces...

featuring hollow box-section short spars which connected with linen-bandaged scarf joints, Andrews claims that long runs of spruce were difficult to obtain. The...

A halved joint is a woodworking joint in which the two members are joined by removing material from each at the point of intersection so that they overlap...

"chalky white" brick elevations join on the east side "like an elaborate scarf joint"; the north face is mostly glass, while the south side burrows into the...

Scout Day. World Scout Scarf Day, August 1st, commemorates the first Scout Camp on Brownsea Island in 1907. On World Scout Scarf Day, all active and former...

the joints. The copper wire was supplied in short, inconsistent, lengths. Initially on the 1850 cable, joints were attempted by brazing a scarf joint with...

hand threshing since threshing machines were available by this time. Scarf joints were needed to join timbers longitudinally because these barns are larger...

rafter), then a traditional scarf joint may be the answer. Roy discusses the history, value and creation of this important joint. 107 703 "Country Comfort"...