Soldering (US: /ˈsɒdərɪŋ/; UK: /ˈsoʊldərɪŋ/) is a process of joining two metal surfaces together using a filler metal called solder. The soldering process...

work, solder wire is available in a range of thicknesses for hand-soldering (manual soldering is performed using a soldering iron or soldering gun), and...

A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces. A soldering...

The solderability of a substrate is a measure of the ease with which a soldered joint can be made to that material. Good solderability requires wetting...

soldering is a bulk soldering process used for the manufacturing of printed circuit boards. The circuit board is passed over a pan of molten solder in...

by soldering individual joints with a hot air pencil. Reflow soldering with long industrial convection ovens is the preferred method of soldering surface...

the wrong direction. For soldering n-type semiconductors, solder may be doped with antimony; indium may be added for soldering p-type semiconductors. Pure...

tinning and soldering; an ultrasonic transducer can be mounted on the soldering iron, in a solder bath, or in the wave for wave soldering. The oxide disruption...

Pump Head Fuji Cross Flow Flux Helping hand (tool) Solder Soldering Wave soldering Reflow soldering Restriction of Hazardous Substances Directive (RoHS)...

gold (ENIG) Hot air solder leveling (HASL) Immersion silver plating (IAg) Immersion tin plating (ISn) Reflow soldering Wave soldering Tong, K. H., M. T...

Dip soldering is a small-scale soldering process by which electronic components are soldered to a printed circuit board (PCB) to form an electronic assembly...

called the solder form for the soldering. By convention, whenever the choice of soldering is unique or canonically determined, the solder form is called...

on Technical Aspects of Critical and Strategic Materials. (1970), Trends in the use of tin, National Academies, p. 28. [1] Body Soldering Tools v t e...

boards that are soldered automatically using reflow or wave soldering techniques. Once applied, openings must be made in the solder mask wherever components...

defects into PCB Electroless Nickel Immersion Gold (ENIG) Immersion Silver (IAg) Organic Solderability Preservative (OSP) Reflow soldering Wave soldering...

A soldering gun is an approximately pistol-shaped, electrically powered tool for soldering metals using tin-based solder to achieve a strong mechanical...

Contact soldering stations A soldering station is a multipurpose power soldering device designed for electronic components soldering. This type of equipment...

difficulties for the soldering process. As package pins got closer together, the danger of accidentally bridging adjacent pins with solder grew. A further...

soldering techniques used to attach components to a PCB. High volume production is usually done with a pick-and-place machine and bulk wave soldering...

Ultrasonic soldering (U/S soldering) is a flux-less soldering process that uses ultrasonic energy, without the need for chemicals to solder materials,...

Selective soldering is the process of selectively soldering components to printed circuit boards and molded modules that could be damaged by the heat...

Solder reflow Adhesive underfill Final result Head-in-pillow defect, a solder ball failure Definition of: solder ball, PC Magazine glossary Soldering...

temperatures required for reflow soldering, because the plastic has a lower melting point since they were designed for wave soldering methods. Some JST surface-mount...

non-contact soldering/desoldering methods: infrared soldering and soldering with hot gas. With infrared soldering, the energy for heating up the solder joint...

(IAg) Immersion tin plating (ISn) Organic solderability preservative (OSP) Reflow soldering Wave soldering "Surface Finishes in a Lead Free World". Uyemura...

(switch), a particular switch or relay contact Cold contact (soldering), a cold soldering joint Cold junction (disambiguation) Cold fusion (disambiguation)...

"Soldering" is a song written by Ewart Beckford & Alvin Ranglin, and originally released by the Starlights featuring Stanley Beckford in 1975. Other artists...

(thermocouple), a contact of a thermocouple Cold junction (soldering), a cold soldering joint in soldering Cold fusion (disambiguation) Cold contact (disambiguation)...

to Brazing. Wikisource has the text of the 1911 Encyclopædia Britannica article "Brazing and Soldering". European Association for Brazing and Soldering...

on the PWB during reflow soldering. For this purpose, the space between the pads is often coated with a solder mask. The solder mask materials have no affinity...