like extruder screws, spinnerets and static mixers. Thermal cleaning is the most common cleaning method in industrial environment. A variety of different...
8 KB (734 words) - 10:24, 29 January 2024
Several cleaning methods Cleaning is the process of removing unwanted substances, such as dirt, infectious agents, and other impurities, from an object...
7 KB (616 words) - 15:37, 13 May 2024
Pyrolysis (section Thermal cleaning)
Several types of thermal cleaning systems use pyrolysis: Molten Salt Baths belong to the oldest thermal cleaning systems; cleaning with a molten salt...
78 KB (8,123 words) - 01:31, 27 April 2024
Dry cleaning is any cleaning process for clothing and textiles using a solvent other than water. Clothes are instead soaked in a water-free liquid solvent...
31 KB (3,791 words) - 16:33, 27 April 2024
sustainable source of clean energy, particularly in tropical regions with access to deep ocean water. OTEC uses the ocean thermal gradient between cooler...
98 KB (12,212 words) - 20:52, 19 March 2024
Thermal insulation is the reduction of heat transfer (i.e., the transfer of thermal energy between objects of differing temperature) between objects in...
15 KB (1,781 words) - 01:11, 23 March 2024
Ultrasonic cleaning is a process that uses ultrasound (usually from 20 to 40 kHz) to agitate a fluid, with a cleaning effect. Ultrasonic cleaners come...
14 KB (1,649 words) - 11:48, 9 March 2024
Electrospinning Hollow fiber membrane Spinning (polymers) Textiles Thermal cleaning Spinneret Li, Norman N. (2008). Advanced membrane technology and applications...
2 KB (222 words) - 03:04, 25 December 2022
A thermal power station is a type of power station in which heat energy is converted to electrical energy. In a steam-generating cycle heat is used to...
45 KB (6,097 words) - 17:22, 26 February 2024
Thermal comfort is the condition of mind that expresses subjective satisfaction with the thermal environment. The human body can be viewed as a heat engine...
73 KB (9,355 words) - 20:46, 7 May 2024
themselvesPages displaying short descriptions of redirect targets Thermal cleaning – Industrial cleaning techniques Thermoforming – Manufacturing process for molding...
91 KB (11,612 words) - 03:14, 16 May 2024
as the thermal flywheel effect. The thermal mass of heavy structural elements can be designed to work alongside a construction's lighter thermal resistance...
16 KB (2,215 words) - 12:58, 9 March 2024
Fused deposition modeling Gravimetric blender Industrial finishing Thermal cleaning TEPPFA, The European Plastic Pipes and Fittings Association. "Production...
20 KB (2,772 words) - 18:34, 12 April 2024
Tetrachloroethylene (redirect from Dry cleaning fluid)
is a colorless liquid widely used for dry cleaning of fabrics, hence it is sometimes called "dry-cleaning fluid". It also has its uses as an effective...
25 KB (2,378 words) - 19:19, 18 May 2024
November 24, 1998, to Robert W. Glanville of Westfall Manufacturing. Thermal cleaning Paul, Edward L. (2004). Handbook of Industrial Mixing-Science and Practice...
6 KB (665 words) - 16:33, 3 March 2024
Duct (flow) (redirect from Duct cleaning)
appliances. Cleaning of the duct system may be necessary if: Sweeping and dusting the furniture needs to be done more than usual. After cleaning, there is...
24 KB (3,269 words) - 23:49, 10 May 2024
Polymer science Printed electronics Seal (mechanical) Thermal barrier coating Thermal cleaning Thin-film deposition Thermosetting polymer Vitreous enamel...
42 KB (4,241 words) - 17:40, 16 May 2024
Convection (heat transfer) (redirect from Thermal convection)
than buoyancy forces (for example, a water pump in an automobile engine). Thermal expansion of fluids may also force convection. In other cases, natural...
10 KB (1,283 words) - 17:14, 14 February 2024
Thermal energy storage (TES) is the storage of thermal energy for later reuse. Employing widely different technologies, it allows surplus thermal energy...
66 KB (7,836 words) - 22:36, 2 May 2024
as cranes, ships, bridges, and sluice-gates. In addition, thermal lancing is used to clean the bottom of steel furnace pots, which accumulate a skull...
7 KB (746 words) - 19:22, 3 April 2024
NTPC Limited (redirect from National Thermal Power Corporation Limited)
NTPC Limited, formerly known as National Thermal Power Corporation, is an Indian central Public Sector Undertaking (PSU) under the ownership of the Ministry...
39 KB (2,873 words) - 08:51, 1 May 2024
A thermal expansion valve or thermostatic expansion valve (often abbreviated as TEV, TXV, or TX valve) is a component in vapor-compression refrigeration...
13 KB (1,708 words) - 07:23, 7 February 2024
Melamine foam (category Cleaning tools)
that when used for cleaning it works like extremely fine sandpaper, getting into tiny grooves and pits in the object being cleaned. On a larger scale...
4 KB (442 words) - 16:38, 13 May 2024
Concentrated solar power (redirect from Solar thermal electric power plants)
power (CSP, also known as concentrating solar power, concentrated solar thermal) systems generate solar power by using mirrors or lenses to concentrate...
91 KB (10,275 words) - 15:14, 9 April 2024
Thermography (redirect from Thermal vision)
Infrared thermography (IRT), thermal video and/or thermal imaging, is a process where a thermal camera captures and creates an image of an object by using...
32 KB (3,815 words) - 04:51, 20 April 2024
Heat transfer (redirect from Thermal transmission)
Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical...
66 KB (8,457 words) - 20:18, 13 May 2024
Heat exchanger (section Self cleaning)
cleaned periodically. Tubular heat exchangers can be cleaned by such methods as acid cleaning, sandblasting, high-pressure water jet, bullet cleaning...
68 KB (9,314 words) - 06:20, 22 March 2024
A thermal oxidizer (also known as thermal oxidiser, or thermal incinerator) is a process unit for air pollution control in many chemical plants that decomposes...
14 KB (1,722 words) - 10:24, 15 August 2023
In heat transfer, the thermal conductivity of a substance, k, is an intensive property that indicates its ability to conduct heat. For most materials...
139 KB (4,010 words) - 02:30, 6 April 2024
between thermal sensation votes and indoor temperature. The neutral temperature is the solution of the resulting regression model by setting the thermal sensation...
14 KB (1,583 words) - 19:59, 7 May 2024