Young's modulus (or Young modulus) is a mechanical property of solid materials that measures the tensile or compressive stiffness when the force is applied...

An elastic modulus (also known as modulus of elasticity) is the unit of measurement of an object's or substance's resistance to being deformed elastically...

law. The reciprocal of the bulk modulus at fixed temperature is called the isothermal compressibility. The bulk modulus K {\displaystyle K} (which is usually...

specimen. Young's modulus is independent of the component under investigation; that is, it is an inherent material property (the term modulus refers to...

Bulk modulus, a measure of compression resistance Elastic modulus, a measure of stiffness Shear modulus, a measure of elastic stiffness Young's modulus, a...

linear elastic regime) the tangent modulus is equivalent to Young's modulus. Above the proportional limit the tangent modulus varies with strain and is most...

In mechanics, the flexural modulus or bending modulus is an intensive property that is computed as the ratio of stress to strain in flexural deformation...

Specific modulus is a materials property consisting of the elastic modulus per mass density of a material. It is also known as the stiffness to weight...

In materials science, shear modulus or modulus of rigidity, denoted by G, or sometimes S or μ, is a measure of the elastic shear stiffness of a material...

measures the resonant frequencies in order to calculate the Young's modulus, shear modulus, Poisson's ratio and internal friction of predefined shapes...

between −1.0 and +0.5 because of the requirement for Young's modulus, the shear modulus and bulk modulus to have positive values. Most materials have Poisson's...

ultrasound or magnetic resonance imaging, and often displays the Young's modulus or shear modulus of tissue in kilopascals. In materials science and engineering...

lightness, for a rod that will be pulled in tension the specific modulus, or modulus divided by density E / ρ {\displaystyle E/\rho } should be considered...

properties can be well-characterized by the Young's modulus, Poisson's ratio, Bulk modulus, and Shear modulus or they may be described by the Lamé parameters...

instance, Young's modulus applies to extension/compression of a body, whereas the shear modulus applies to its shear. Young's modulus and shear modulus are...

increases with polymer chain length and crosslinking of polymer chains. Young's modulus quantifies the elasticity of the polymer. It is defined, for small...

These curves reveal many of the properties of a material, such as the Young's modulus, the yield strength and the ultimate tensile strength. Generally speaking...

indentation hardness, a relation between the ASTM D2240 hardness and the Young's modulus for elastomers has been derived by Gent.Gent's relation has the form...

_{y}}{2}}} where Ur is the modulus of resilience, σy is the yield strength, εy is the yield strain, and E is the Young's modulus. This analysis is not valid...

can be described with the following material properties: Young's Modulus, the shear modulus, and the Poisson's ratio, in relatively simple mathematical...

of twist The elastic modulus of a material is not the same as the stiffness of a component made from that material. Elastic modulus is a property of the...

member against bending deflection/deformation. It is a function of the Young's modulus E {\displaystyle E} , the second moment of area I {\displaystyle I}...

technique proved to be a useful tool. It can be used to measure Young's modulus, Shear modulus, Poisson's ratio and damping coefficient in a non destructive...

exhibits Isotropic behavior then the Flexural Modulus is equal to the Modulus of Elasticity (Young's Modulus). Flexural rigidity has SI units of Pa·m4 (which...

the table below, Nylon 11 has lower values of density, flexural and Young's modulus, water absorption, as well as melting and glass transition temperatures...

elastic modulus (Young's modulus) of a filled polymer can be found using the equation below: E = E0 (1 + 2.5Φ + 14.1Φ2) where: E0 = Modulus of unfilled...

the stress-strain curve described by the Young’s Modulus, has been reported for nanowires, however the modulus depends very strongly on the microstructure...

stress divided by two times the Young's modulus of elasticity. That is, Modulus of resilience = Yield stress2/2 (Young's modulus) The toughness of a material...

cube corner (90°) tip is 2.598. The reduced modulus E r {\displaystyle E_{r}} is related to Young's modulus E s {\displaystyle E_{s}} of the test specimen...

straight line. The slope of this line is known as Young's modulus, or the "modulus of elasticity". The modulus of elasticity can be used to determine the stress–strain...