Artemis-class attack cargo ship

USS Zenobia – a typical Artemis-class AKA
Class overview
BuildersWalsh-Kaiser Co., Inc.
Operators United States Navy
Built1944–1945
Completed32
General characteristics
TypeS4-SE2-BE1
Displacement4,087 tons
Length426 ft (130 m)
Beam58 ft (18 m)
Draft16 ft (5 m)
Speed16.9 kn (31 km/h)
Complement303 (varies)
Armament

The Artemis-class attack cargo ships were a series of attack cargo ships (AKAs) built by Walsh-Kaiser Company of Cranston and Providence, Rhode Island, during World War II.

Like all AKAs, they were designed to carry combat loaded military cargo and landing craft, and to use the latter to land weapons, supplies, and troops on enemy shores during amphibious operations. Compared to other classes of AKAs, the Artemis class had a much shallower draft, and a lower main deck aft. All these ships were built on the same standard hull design, but there were some differences from ship to ship: The hull was a S-Type Special-Purpose Ships, same as S3-M2-K2 Landing Ship, Tank.[1]

The armament varied, as did that of the other ships of the day. During 1944–1945, the 5"/38 caliber gun was recognized as the best gun for the dual role of antiaircraft and naval gunfire support, and the 40 mm gun was seen as the best antiaircraft gun. The older 20 mm and .50 caliber guns had been recognized to be of limited value, and were being phased out, though they appeared on some of these ships. The 20 mm guns were later removed from all of them, but it is not clear just when this happened.

The complement varied as well, but the DANFS figures sometimes seem to confuse ship's company with embarked troops in determining a ship's complement.

See also[edit]

References[edit]