Hyundai A engine

A engine
Overview
Manufacturer	Hyundai Motor Group
Production	2002–present
Layout
Configuration	Inline-4
Displacement	2.5 L (2,497 cc)
Cylinder bore	91 mm (3.58 in)
Piston stroke	96 mm (3.78 in)
Cylinder block material	Compacted graphite iron
Cylinder head material	Aluminum
Valvetrain	DOHC 4 valves x cyl.
Combustion
Turbocharger	Variable geometry (A II only) Wastegate (A I only)
Fuel system	Common rail direct injection
Management	Bosch with air system-based charge control
Fuel type	Diesel
Cooling system	Water-cooled
Output
Power output	110–177 PS (81–130 kW; 108–175 hp)
Torque output	33–46 kg⋅m (324–451 N⋅m; 239–333 lbf⋅ft)
Emissions
Emissions target standard	Euro 3 Euro 4 Euro 5 Euro 6

The Hyundai A engine also known by its engine code D4CB is a 2.5 L diesel 4-cylinder automobile engine produced by Hyundai Motor Group from 2002 up to the present.^{[1][2][3][4][5][6]} This is one of the first diesel engines designed and developed solely by Hyundai without any license from any other car manufacturer.

The A line of engines feature four cylinders compacted graphite iron block and aluminum cylinder head unit, with chain driven dual overhead camshafts operating four valves per cylinder. Fuel is supplied to the unit using Bosch 2nd-generation common rail direct injection (CRDi) through piezoelectric injectors operating at 1,360 bar (19,700 psi) for the A I series while it was increased to 1,600 bar (23,000 psi) for the A II series with the latter having been equipped with a Variable Geometry Turbocharger (VGT) with some models having a Wastegate (WGT) instead.

As the older A models were rated below their intended Euro rating (A I series rated for Euro 3 is taxed for Euro 2, while earlier A II series rated for Euro 4 is taxed for Euro 3), to achieve the intended Euro 5 emission and taxation compliancy, the later A II series from 2011-onwards is fitted with a standard Diesel particulate filter to meet the intended emissions standards.

The 2.5 L (2,497 cc) A I was produced from 2002 through 2006. Typical output is 104 kW (142 PS) at 3800 rpm. Bore and stroke is 91 mm × 96 mm (3.58 in × 3.78 in). It was available with either 4-speed automatic or 5-speed manual transmissions.^[7]

Applications

• Hyundai Starex (2002–2006)^[8]
• Hyundai Porter (2006–2012)
• Kia Sorento (2002–2008)
• Kia Bongo (2006–2012)

The 2.5 L (2,497 cc) A II is produced since 2007. Cylinder bore and stroke is 91 mm × 96 mm (3.58 in × 3.78 in). This series saw the introduction of a variable geometry turbocharger as an improvement from the initial traditional turbocharger of the A I while some later models shifted to a wastegate instead for some markets.

Sometime in 2008 through 2021 some engines are designated as D4CB-L A II which was a low-power version that is rated only for 122 kW (165 PS) instead of the usual 127 kW (172 PS). 2011 models and beyond are also equipped with a standard particulate filter for emission compliance purposes.

Applications^[9]

• Hyundai Starex (2007–2021)
• Hyundai H350 (2014–present)
• Hyundai Porter (2013–present)
• Kia Sorento (2006–2008)
• Kia Bongo (2013–present)

• List of Hyundai engines

This article about an automotive part or component is a stub. You can help Wikipedia by expanding it.

• v
• t
• e