French
DeutschLens sag
Lens sag is a problem that sometimes afflicts very large refracting telescopes. It is the equivalent of mirror sag in reflecting telescopes. It occurs when the physical weight of the glass causes a distortion in the shape of the lens because the lens can only be supported by the edges.[1] Making the lens thick enough to prevent deformation would cause it to absorb too much light to be useful.[2] A mirror on the other hand can be effectively supported by the entire opposite face, making mirror sag much less of a problem.[2] One expensive solution to lens sag is to place the telescope in orbit around the Earth.[3]
The technical limit concerning lens sag was reached at the Yerkes refractor (1897) with an aperture of 40 in (100 cm).[2] Hence the 1890s marked the high point of the great refractors era.[4]
References
[edit]- ^ "Refracting Telescopes". Las Cumbres Observatory. Retrieved 2 June 2025.
- ^ a b c Simmons, Mike (2008). "Building the 60-inch Telescope". Mount Wilson Observatory. Retrieved 2 June 2025.
- ^ Gibilisco, Stan (2002). Physics Demystified. McGraw-Hill Education. p. 515. ISBN 978-0071382014. Retrieved 2 June 2025.
- ^ Cottrell, Geoff (2023). Observational Astronomy: A Very Short Introduction. OUP Oxford. p. 13. ISBN 978-0192665515. Retrieved 2 June 2025.
 | This optics-related article is a stub. You can help Wikipedia by expanding it. |